APEX SM-10 | 19" x 9" ET30 | 5x120mm | 72.56mmAPEX Race Parts designs and manufactures high performance, flow formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high quality performance parts that meet the demands of racing and street performance enthusiasts. FOR WHEEL FITMENT GUIDE https: apexwheels. com fitment
APEX Race Parts designs and manufactures high performance, flow-formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high-quality performance parts that meet the demands of racing and street performance enthusiasts.
ModelSM-10 Wheel QuantitySold Individually Wheel Diameter19" Wheel Width9.0" OffsetET30 Bolt Pattern5x120mm Centre Bore72.56mm Load Rating1,650lbs Weight22.5lbs (10.20kg) Face ProfileProfile 2; medium concavity Wheel ConstructionFlow Formed
A FITMENT FOR YOU
Need help selecting the proper wheel fitment for your BMW? APEX Race Parts have tirelessly test-fitted hundreds of setup combinations in order to provide direct-fit, spacer-free wheel packages for everything from showroom-fresh cars to all-out race builds.
Fit Matters The right solution for every application
The SM-10 wheel includes details specifically implemented to enhance the BMW owners' track day and street performance experience. An optimized car setup begins with the right wheel and tyre fitment, and without model-specific attention, maximum performance is compromised. These wheels were developed for various BMW chassis’s and will work in either square or staggered configurations.
Face Profile One design, many levels of beauty
Two face profiles will be utilized to maximize spoke concavity and reduce weight on the SM-10 design. The medium concavity is offered on narrow-width applications, while the deep concavity is offered on wide-width applications. Concavity is dependent on fitment, and not selected independently.
"I" Beam Spokes More than just a pretty face
The spokes of the SM-10 were designed to be robust where they need to be, and extra lightweight where they should be. Weight is reduced by CNC machining material out from the sides of each spoke. It’s expensive and avoided by almost every manufacturer, but affordable with volume. In each size of the SM-10 designs, the I-beam spokes are carefully evaluated from structural aspects to ensure minimal weight, brake clearance, and remarkable strength.
Beefier Lip Ready for more abuse
By saving weight elsewhere, APEX have added extra material where it counts. They've beefed up the barrel’s inner lip on the SM-10 to better handle the repetitive abuse seen on the track.
Open Hub Centre Easy to access lugs
Race wheels can't just be light, they need to function in a high performance environment. Unlike the narrow lug recesses of most other wheels, the SM-10 wheel features a wide open hub centre that easily accommodates oversized race lugs and beefy impact sockets. This allows for quick and easy wheel changes and prevents chips and scratches from tools.
Hub Centric No rings or adapters here
All APEX SM-10 wheels are purpose built for select vehicle applications, and centering rings are never required for any BMW application. All 5x120mm bolt pattern wheels feature a direct-fit, 72.56mm centre bore.
Brake Clearance A lot of room in a tight space
Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. The barrel of the SM-10 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. APEX have 2D modelled most Big Brake Kits available in Solidworks and tweaked the wheel design of the SM-10 prior to production in order to fit as many kits as possible.
Wheel Hardware Original or Aftermarket, it all works
The SM-10 wheel can be used with all OEM and aftermarket mounting hardware with a 60° tapered seat. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The SM-10 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.
Centre Cap A factory fit and finish
APEX don't reuse one cap design for all of their wheels. Every APEX wheel is designed to work with factory centre caps. You can easily replace APEX centre caps with OEM roundels for a clean factory look. APEX wheels will come with the redesigned, Gloss Black centre cap that mimics the size and shape of a BMW factory centre cap.
TPMS Sensors They all fit
TPMS sensors, which monitor tyre pressure, are one piece of technology that can't be compromised. The attention to OEM compatibility on the SM-10 wheel doesn't end with centre caps. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard sized metal or rubber valve stem.
THE APEX STANDARD
Flow Forming Benefits of forging, without the pain
These APEX wheels are produced using a manufacturing process known as flow forming. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminium into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.
Testing & Certifications Verifiable 3rd party testing
Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and they have the proof to back it up.
Japan’s JWL is a commonly followed standard for wheel load ratings. The APEX flow formed wheels meet, and most exceed, their load rating requirements. Most manufacturers only meet the minimum while some don’t even do that. Check and verify load ratings before you buy.
Weight & Strength Optimization It’s all in the details
APEX took more time than ever before on this step, revising and iterating their design to reduce weight as much as possible. After many months of BMW-specific optimizations, APEX minimized weight while maximizing strength. The result is a lightweight wheel with extra strength in all the right places. Use the SM-10 with confidence on both street and track.
Finishes Because being faster is just not enough
The SM-10 wheel is available in multiple finishes. All APEX wheels are finished using a comprehensive multi-stage liquid paint system over a powder coated base coat. Standard finishes include gloss-metallic finishes, and semi-gloss or matte finishes.
Often overlooked, painted or powder coated lug hole seats can cause hardware to loosen or begin the spread of paint chipping to more visible sections. The coating process of the SM-10 leaves lug holes, center bores and mounting pads untouched, which ensures proper fit and torque values.
Lifetime Warranty A wheel you can depend on
As of recent, all APEX wheels now come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. Please contact us for the full terms and conditions.
Models
1 Series / E82 / E88 (2007-2013) / 1 Series M (1M)
Size: Medium/Large, Color: Dog Ness Monster - Large, Size: Medium/Large, Color: Dog Ness Monster - Large
I have a 1-year-old toy fox terrier (Rocky, pictured). He has been chewing on this toy for seven months now; it is one of his favorites. He has been unable to seriously damage the "ocean" portion of this toy, but as you can see from the provided image, the sea serpent has not faired that well. It is missing its snout and smaller portions of the humps. My guess is that the advertiser images showing much larger dogs with "like new" versions of the toy are just that...NEW AND UNCHEWED.
I have not had to clean up bits of this toy from my floor, so I assume Rocky has been swallowing them. My hope is that the yellow material of the serpent is not chemically dangerous when exposed to digestive fluids.
Rocky easily destroys plush toys in a matter of days if not hours and, consumed pieces of a small microfiber blanket that he liked to toss around and play tug-of-war with (past tense as he destroyed it and has since been trashed after I began finding feces-stained undigested pieces of it lying around). Since this toy has survived seven months and has remained recognizable, I have to agree it is durable.
Just beware, if my small toy fox terrier can damage the toy as pictured, expect your large breed chewer to do similar or worse damage. Also, the toy is very heavy! When Rocky drops it down a flight of stairs, it makes a MAJOR thud at the bottom, and sometimes makes me wonder if it might crack the large tile at the bottom.
I cautiously recommend the product.
Note the yellow frisbee in Rocky's picture. It is only a few months old and surprisingly has not suffered any chew damage despite substantial abuse. It appears to bend in the wind like a proverbial reed, evading damage by yielding to pressure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 5, 2024
E
Verified Purchase
Elaina rice
Charlottesville, US
★★★★★ 5
Dog loves it! For tough chewers for sure
Size: Medium/Large, Color: Dog Ness Monster - Large, Size: Medium/Large, Color: Dog Ness Monster - Large
Dog absolutely loves it, he’s super rough on all of his toys they usually last about 10 minutes bore they are torn to shreds. It’s lasting through his chewing so I’m happy. It’s also super cute.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2026
M
Verified Purchase
miriana
Natrona Heights, US
★★★★★ 5
Loch Yes
Size: Medium/Large, Color: Dog Ness Monster - Large, Size: Medium/Large, Color: Dog Ness Monster - Large
Cute toy, dog really likes it. I had my doubts when I pulled it out, and honestly so did she, but the soft part bounces, so that got her going. We've had it for about a week. My dog is ~70 lbs and a moderate chewer, and this monster still gets regular play and is holding up well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
Z
Verified Purchase
zee
Bozeman, US
★★★★★ 5
Great toys for aggressive chewers
Size: Medium/Large, Color: Turkey Day Drumstick - Large
These are great toys they last a while they are destroyed after a while but both dogs are aggressive chewers but they last about a year and a half. And they are go to toys they have one that is a shark mouth and they love it I have bought 4. (two of them the pups lost ).
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 20, 2025
A
Verified Purchase
Anjelica
Carnegie, US
★★★★★ 4
Durable and Fun, Just Gets a Bit Rough
Size: Medium/Large, Color: Chopper - Large
This is a really good toy overall, especially if you have dogs that love to chew. My dogs were immediately into it—they play with it nonstop, toss it around, and stay entertained for a while, which I love. It definitely holds up better than most toys we’ve tried.
The only reason I’m giving it 4 stars instead of 5 is because over time it does start to fray a bit and gets a little rough, especially with heavy chewing. It’s not completely indestructible, but it still lasts longer than a lot of other toys.
Overall, still a great buy and I would recommend it if your dogs need something tough but fun!
Promo Codes Available: