Huepar B21CG Laser Level

Huepar B21CG Laser Level1H 2V Multi line Laser for Wide Application: The laser level B21CG projects 360 horizontal line and two 120 vertical lines cover the floor, wall, ceiling around the room. The individual and combined laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self levels and indicates out of level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to

• 1H / 2V Multi-line Laser for Wide Application: The laser level B21CG projects 360° horizontal line and two 120° vertical lines cover the floor, wall, ceiling around the room. The individual and combined laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

• Dual Power Methods & Type-C Charging Port: Huepar B03CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.

• Brighter Green Laser & Outdoor Pulse Mode: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 25m (300LUX) of accuracy within ±3mm at 10m. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 60m with Huepar Line Laser Detector.

1 H & 2V Mulit-line Laser Level:

One 360° horizontal and two 120° vertical lines enable users to cover the floor, wall, ceiling all around the room. Two vertical lines to make dividing a room easier.

Short press operation button to switch the laser lines in turn. Longer working time by activating only the laser lines needed for the job.

The horizontal line, vertical lines and combined laser lines can be selected individually depends on job site applications.

Self-leveling Mode:
When the laser tool is switched to the unlocked position, the self-leveling mode is enabled.
The laser beam will flash when the tool is beyond self-leveling range ± 4°.

Manual / Tilt Mode:
When the pendulum locked, the laser tool can be placed for alignment at any angle.
The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.

Power-saving Outdoor Pulse Mode:

• Turn ON the pulse mode: After power ON, short press "P" button to switch ON/OFF the pulse mode.
• Pulse mode extends the working range up to 200 feet in brighter working conditions when using with Huepar Line Laser Detector
• When the pulse mode is activated, the laser beams are dimmer, the pressure on eyes is less when working at close range, and the working time can be appropriately extended
• It is compatible with Huepar LR-6RG / LR-5RG Line Laser Receiver (need to purchase separately) only.
• Keep the pulse mode on when using with a receiver.

Type-C Charging Port:

l This laser tool utilizes the included large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time.

l The lithium battery with the Type-C charging port can be charged separately.

l Direct input charging: When taking out the battery, the laser tool can be used at the job site by plugged in.

l Four battery indicators on keypad allow users to know the current battery volume.

l Charging protection helps prevent from overcharging.

More Installation Methods:

l 1/4"-20 female thread on the laser level can help to mount it to the tripod or laser mounting pole.

l 360° Strong Magnetic Pivoting Base: Allows being adsorbed onto metal track and steel. The base provides 360° free rotation to meet different angles required.

l 1/4"-20 and 5/8"-11 mounting threads on the bottom of the bracket for temporary fastening in place or being fixed on tripod or laser mounting pole.

l Replaceable Protective Cover: The laser windows can be removed and replaced with a screwdriver.

l Green Target Plate: Increases the visibility of the laser beam.

Durable Design:

l The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection.

l The kit comes with a hard carry case bringing much more convenience to carry and store the laser tool.

l IP54 water/dust resistance ensures you work well in hazardous working conditions.

Bright Green Laser Diode:

l This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.

l At the same power, the green laser is twice bright as the red laser, with a working range up to 25m (300LUX) of accuracy within ±3mm at 10m.

Package Contents:

• l 1 x Huepar B21CG Laser Level
• l 1 x Rechargeable Lithium Battery 3.7V / 5200mAh
• l 1 x Type-C Power Cord
• l 1 x Power Adapter
• l 1 x 360° Magnetic Pivoting Base
• l 1 x Green Laser Target Plate
• l 1 x Multilingual User Manual
• l 1 x Hard Carry Case
• l The laser windows can be removed and replaced with a screwdriver.