SKU: 30228571033

EBC 67-74 Ac 428 7.0 Redstuff Front Brake Pads

Sale price$98.55 Regular price$109.50
Save 10%

Pay in installments of $27.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 16 - Jul 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

EBC 67-74 Ac 428 7.0 Redstuff Front Brake PadsThere are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60 90 percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up. This material is a Synthetic Fiber

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.

  • Great For Fast Street And Premium Sedan
  • Ideal European Vehicle Brake Upgrade
  • High Friction Low Heat Fade
  • Lowest Dust Pad In Range

This Part Fits:

Year Make Model Submodel
1967-1973 AC 428 Base
1966 AC Shelby Cobra Base
1963-1965 Aston Martin DB5 Base
1964-1965 Aston Martin DB5 Vantage
1965 Aston Martin DB5 Volante
1968-1970 Aston Martin DB6 Base
1968-1970 Aston Martin DB6 Radford
1968-1969 Aston Martin DB6 Vantage
1968-1970 Aston Martin DB6 Volante
1972-1973 Aston Martin Vantage Base
1966-1968 Ferrari 330 GTC Base
1966-1968 Ferrari 330 GTS Base
1967-1969 Ferrari Dino 206 GT Base
1973-1974 Jaguar XJ12 Base
1972-1973 Jaguar XJ6 Base
1971-1974 Jaguar XKE Base
1969-1971 Jensen Interceptor FF
1969 Jensen Interceptor MK I
1970-1971 Jensen Interceptor MK II
1972-1976 Jensen Interceptor MK III
1972-1973 Jensen Interceptor SP
1965-1966 Shelby Cobra Base
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 30228571033

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Russell B
Dallas, US
★★★★★ 5
Sturdy. Tight fit. No wobble
Size: 2 Pairs / 4 pcs
These are the best ones I’ve found. This order will connect one wire. Luckily that’s what I needed. If you’re doing more than one wire…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
E
Verified Purchase
Ed Train
Draper, US
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast. I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers. (I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.) I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers. These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug. I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin. My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs. I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
V
Verified Purchase
V88
Draper, US
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
G
Verified Purchase
Gummy Roach
Birmingham, US
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals. These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together. The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug. I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
K
KBar
Phoenix, US
★★★★★ 5
Heavy-Duty 4 AWG Cable With Flexible Insulation
Size: 10ft, Color: 4awg
I am satisfied with this 4 AWG cable. The insulation coating is soft, and the cable itself is very pliable, making it easy to bend and route into the configuration needed for installation. Despite the flexibility, it still feels like a heavy-duty cable designed to handle demanding applications. I am using this cable to provide the necessary amperage to start the generator on my trailer, and it performs as expected. I also like that the wire gauge and cable properties are clearly printed along the side of the insulation, making identification easy during installation or future maintenance. The cable arrived in good condition with no obvious odor from the insulation or packaging. Overall, this appears to be a quality heavy-duty cable that is flexible, easy to work with, and suitable for high-current applications.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026

recommand products