kennametal sn156 p lange venturi straalpijp

kennametal sn156 p lange venturi straalpijpThe Kennametal SN156 P is a long venturi blast nozzle with a BP200 SiAlON liner, polyurethane jacket and 1 1 4 NPSM brass thread. The BP200 SiAlON liner combines a relatively low weight with good wear resistance. The material offers better break resistance than silicon carbide and standard silicon nitride. The long venturi shape provides higher blasting capacity than a straight bore nozzle. The SN156 P Series is designed for blast hoses with an

The Kennametal SN156-P is a long venturi blast nozzle with a BP200 SiAlON liner, polyurethane jacket and 1-1/4″ NPSM brass thread.

The BP200 SiAlON liner combines a relatively low weight with good wear resistance. The material offers better break resistance than silicon carbide and standard silicon nitride. The long venturi shape provides higher blasting capacity than a straight bore nozzle.

The SN156-P Series is designed for blast hoses with an internal diameter of 25 mm. These nozzles are suitable for applications where reduced weight, a robust metal thread and good wear resistance are important. The BP200 SiAlON liner offers wear resistance comparable to tungsten carbide when used with steel shot, steel grit, iron silicate and aluminium silicate.

These nozzles are not recommended for use with hardened steel shot or hardened steel grit. For applications where hardened steel shot or hardened steel grit is the main abrasive, or where the nozzle is subject to heavy impact, tungsten carbide nozzles such as the TLVE-P Series are generally more suitable.

Features

• Long venturi blast nozzle for higher blasting capacity
• BP200 SiAlON liner with relatively low weight and good wear resistance
• Polyurethane jacket and brass thread
• Robust metal thread with lower weight than a fully steel-jacketed version
• Suitable for blast hoses with an internal diameter of 25 mm
• Wear resistance comparable to tungsten carbide with steel shot, steel grit, iron silicate and aluminium silicate
• Better break resistance than silicon carbide and standard silicon nitride
• Not recommended for hardened steel shot or hardened steel grit
• Thread: 1-1/4″ NPSM

Available Sizes and Lengths
Available in bore sizes #3, #4, #5, #6, #7 and #8. Lengths range from 106 mm to 229 mm.

Note: this nozzle has a 1-1/4″ NPSM thread and does not fit a standard 50 mm nozzle holder. Please check whether your nozzle holder is suitable for this thread.