SKU: 43729406296

power kit dewalt hamer boormachine slijper accu slagmoersleutel dck428p3t

Sale price$475.72 Regular price$528.58
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

power kit dewalt hamer boormachine slijper accu slagmoersleutel dck428p3tSet bestaande uit 4 gereedschappen met Brushless systeem, met 3 18V 5,0 Ah accu's, 2 Dewalt gereedschapskisten, referentiepakket DCK428P3T exclusief voor DEWALT. DCH273Toonaangevende elektropneumatische hamer met gegarandeerde prestaties, 90 snelle boorgaten per lading. Met rotatiestop voor lichte beiteltoepassingen op pleisterwerk en tegels. KENMERKENLeider in de prestatiecategorie, garandeert 90 snelle boorgaten ( 10 mm x 80 mm) per

Set bestaande uit 4 gereedschappen met Brushless systeem, met 3 18V 5,0 Ah accu's, 2 Dewalt gereedschapskisten, referentiepakket DCK428P3T exclusief voor DEWALT.



DCH273

Toonaangevende elektropneumatische hamer met gegarandeerde prestaties, 90 snelle boorgaten per lading. Met rotatiestop voor lichte beiteltoepassingen op pleisterwerk en tegels.

KENMERKEN

Leider in de prestatiecategorie, garandeert 90 snelle boorgaten (Ø 10 mm x 80 mm) per lading
Rotatiestop voor lichte beiteltoepassingen op pleisterwerk en tegels; en Impact Stop voor het boren in hout, keramiek of metaal
Borstelloze motor en biedt grotere duurzaamheid en maximale autonomie
Elektronische koppeling voor beter koppel en maximale duurzaamheid
Laagste trilling op de markt: 6,6 m/s² vermindert vermoeidheid van de gebruiker en maximaliseert de productiviteitstijd
Helder wit LED-licht met vertragingsfunctie om de zichtbaarheid en functionaliteit te verbeteren
Ideaal voor het boren van ankers in beton en baksteen van 4 mm tot 24 mm
Compact, lichtgewicht en ergonomisch ontwerp voor meer comfort en ondersteuning tijdens langere werkperiodes
Inclusief twee 5 Ah Dewalt accu's

DCD796

Compacte borstelloze boorhamer, met ultracompact en lichtgewicht ontwerp dat gebruik in kleine ruimtes mogelijk maakt. Met boor- en schroevendraaierfunctie voor meerdere toepassingen.

KENMERKEN

18V boorhamer met Brushless systeem
Ultracompact en lichtgewicht ontwerp
Twee variabele en omkeerbare snelheden
15 koppelaanpassingsposities voor een nauwkeuriger resultaat
Helder wit LED-licht met 3 intensiteitsinstellingen om de zichtbaarheid en functionaliteit te verbeteren
Handgreep met verbeterd ontwerp voor meer controle en comfort van het gereedschap


DCG405

Minislijpmachine op batterijen met Brushless-systeem, met elektronische rem en koppeling, voor 125 mm-schijven.

KENMERKEN

Borstelloze motor met borstelloos systeem
Elektronische rem die de schijf snel stopt wanneer de trekker wordt losgelaten
Elektronische koppeling die de spelingreactie bij vastlopen of stoppen vermindert
Mesh-bescherming voorkomt dat stof door de motor wordt gezogen
Rubberen behuizing voor betere grip en gebruikscomfort
Zijhandgreep met 2 standen biedt meer comfort en betere controle over het gereedschap
Met 1000 W vermogen
Onbelast toerental 9000 tpm
Met M14 schroefdraad
Gewicht slechts 1,75 kilo

DCF961

De Dewalt DCF961NT is een 18V accu-slagmoersleutel ontworpen voor de meest veeleisende klussen aan staalconstructies. Dit gereedschap is ontworpen voor situaties waarbij een hoog koppel op geschroefde bevestigingsmiddelen vereist is.

KENMERKEN

Borstelloze motor met een koppel tot 1.632 Nm en tot 1.800 slagen per minuut voor krachtig schroeven
Tot 2.372 Nm koppel om het verwijderen van vastzittende schroeven te garanderen
223 mm lengte
Selectiecontrole in 4 modi (laag, precisie, hoog en steigers) voor betere controle over bevestigingstoepassingen, waardoor het risico op schade aan materialen, accessoires en componenten wordt verminderd
De vierkante as van 1/2" zorgt voor een hoger koppel en een uitstekende retentie van de dop
Variabele snelheidstrigger voor meer controle bij alle toepassingen
LED-licht voor betere zichtbaarheid
Ergonomische handgreep die meer comfort biedt
Max. aanhaalmoment: 1632 Nm
Maximaal losdraaimoment: 2373 Nm
Inzet: 1/2″ vierkantaandrijving met borgring
Modi: 3+1-modus
DCB184

XR 18 V Li-Ion railaccu, de XR-technologieaccu's van Dewalt bieden 66% meer autonomie dan standaardaccu's om de meest veeleisende klussen met de vereiste snelheid uit te voeren.

KENMERKEN

Verbeterd lichtgewicht ontwerp biedt de gebruiker meer vermogen zonder de omvang of het gewicht van de 3 Ah-batterijen te vergroten
Geen geheugeneffect en geen zelfontlading, wat zorgt voor maximale productiviteit en de minste uitvaltijd
Compatibel met alle DEWALT 18V XR-gereedschappen
Bescherming tegen oververhitting, overladen en diepe ontlading waardoor de levensduur van de batterij wordt verlengd
Accucapaciteit 5,0 Ah
18V spanning
Beschikt over XR Li-Ion
Gewicht 0,62 kg



DEWALT TSTAK VI DIEPE KOFFER OF GEREEDSCHAPSKIST
Het organiseren van uw elektrisch gereedschap en bouwhandleidingen is veel eenvoudiger met de Dewalt TSTAK VI gereedschapskist.

DEWALT TSTAK VI GEREEDSCHAPFUNCTIES.
Gereedschapskist: 17,5 "x 13,5" x 12,5 "
Groot volume: 23 L
Afneembare en afneembare verdeelbak voor toegang tot de meest gebruikte gereedschappen
Brede handgreep voor intensief gebruik
Zeer resistente en sterke metalen sluitingen en scharnieren, voor intensief gebruik
Stapelbare koffer met alle TSTAK koffers


DE DCK428P3T-VOEDINGSKIT BEVAT

  • DCD796
  • DCF961
  • DCG405
  • DCH273
  • 3 Bat
  • TSTAK
  • TSTAK VI
  • Oplader
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 43729406296

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 1898 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Computer
Draper, US
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option. There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk. Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine. The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two). In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
T
Trendy Tales
Battle Creek, US
★★★★★ 3
Works well but takes up more space than expected
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
This room divider does the job for creating a little extra privacy and was easy enough to set up. The panels feel decent quality and the wider feet help keep it more stable than some cheaper screens I’ve tried. My only issue is that it takes up a bit more room than I expected, especially with the feet sticking out. It’s still portable and folds away nicely, but definitely measure your space first. Overall it works well for separating a room or blocking off an area temporarily. i wish it came in other colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
K
Katrina Rhodes
New York, US
★★★★★ 5
Nice divider, serves it's purpose well!
Size: 3 Panel 12FT W
This room divider worked out very well for what I needed. I wanted a simple way to create a little more privacy and separation in a larger room without doing anything permanent, and this divider was an easy solution. The panels provide good coverage, and the black color gives it a clean, modern appearance that blends in nicely with different décor styles. Assembly was fairly straightforward, and once set up, the wider feet helped keep the divider stable on the floor. I was especially happy with how flexible the panels are to arrange. You can keep it mostly straight, angle it around furniture, or create a more enclosed private space depending on the layout you need. The material allows light to filter through slightly while still offering a noticeable sense of privacy. I’ve used it for separating a workspace area, but it would also work well in bedrooms, apartments, dorms, studios, or shared living spaces. Another plus is that it can be folded and moved without too much effort when you want to change the setup. Overall, this divider delivers a good balance of functionality, portability, and appearance. It’s a practical option for anyone needing temporary room separation without installing permanent walls or curtains.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
J
Jamie K.
Port Orchard, US
★★★★★ 5
Perfect for Adding Privacy to a Piano Studio
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
I Ordered the 2 Panel version which is way too big for my needs... that's on me. So keep in mind that the picture shows a fabric made for two panels only being used on one and hence it is not pulled tight; it would pull tight and not be so wrinkly if it was set up properly as two panels. The metal pools that make up the panels seem to be well made, stable, and of good quality. They were very easy to put together and they stand up tall with plenty of height. The appearance of it with the fabric on it isn't as elegant as it could be, but it still looks good enough. The material is plenty solid, not allowing light through it, and thereby making a solid barrier. I am using it to block the view out the studio door when a student is sitting at the piano to avoid distractions from the hallway. It will allow a student to enter the studio with our distracting the student who is at the piano.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
J
Just Me
Birmingham, US
★★★★★ 5
Room Divider That Gives Instant “This Is a Separate Space Now” Energy
Size: 3 Panel 12FT W
The Siebwin 3 Panel Folding Privacy Screen is surprisingly effective at changing the feel of a room without requiring construction, commitment, or somebody yelling about load bearing walls. The 12 foot width gives a substantial amount of coverage, making it useful for creating privacy, dividing open areas, blocking visual clutter, or setting up temporary sections within larger rooms. This saved us a ton of time and money in our new studio and enabled us to create a kitchen and office in one room. The wider feet make a huge difference because flimsy room dividers that collapse every time someone exhales too aggressively are deeply annoying. This one feels more stable and grounded once positioned. The folding design makes it easy to move around or adjust depending on the space, and it folds down relatively compactly when not in use. It is basically the introvert curtain wall of dreams. The material has a clean, neutral look that blends well into different room styles without screaming “temporary office cubicle panic.” It works well for apartments, studios, shared spaces, dressing areas, or simply hiding the mountain of chaos you swear you are going to organize tomorrow. Practical, portable, and refreshingly easy to use without turning setup into a three hour emotional event.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026

recommand products