SKU: 90245245779

034Motorsport Extended Tie Rod End Kit, Audi & Volkswagen PQ35/MQB - 034-406-2033

$99.00 $110.00
Save 10%
No.2 Bestseller on ekmsliberia.info >

Pay in installments of $27.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

034Motorsport Extended Tie Rod End Kit, Audi & Volkswagen PQ35/MQB - 034-406-2033034 Motorsport Extended Tie Rod End Kit, Audi & Volkswagen PQ35 MQB 034 406 2033. * to be used on 034 motorsport RCO ball joints or 034 aftermarket control arms. Not for stock suspension systems. The 034Motorsport Extended Tie Rod Kit for Audi & Volkswagen PQ35, MQB features heavy duty forged steel body tie rods re engineered for performance driven suspension set ups. With an extra 20mm of adjustment length on the 034Motorsport Extended Tie Rod End

034 Motorsport - Extended Tie Rod End Kit, Audi & Volkswagen PQ35/MQB- 034-406-2033.

* to be used on 034 motorsport RCO ball joints or 034 aftermarket control arms. Not for stock suspension systems.

The 034Motorsport Extended Tie Rod Kit for Audi & Volkswagen PQ35, MQB features heavy-duty forged steel body tie rods re-engineered for performance-driven suspension set-ups. With an extra 20mm of adjustment length on the 034Motorsport Extended Tie Rod End Kit, Dynamic+ RCO Ball Joints and MQB Control Arms can both be installed together safely, allowing for further handling performance thanks to the added camber and caster. The Extended Tie Rod Kit was tested extensively and developed on 034Motorsport's MK7 GTI, 8V A3, 8Y S3, and MK7.5 Golf Alltrack.

Due to the amount of negative camber achieved with both Dynamic+ RCO Ball Joints and Control Arms installed, the OE tie rod ends run out of threads for safe engagement with the OE inner tie rod and will not allow for proper installation.

NOTE: This product can only be installed in conjunction with these kits, individually or together:

If you do not have either or both of these products installed on your car, the Extended Tie Rod End Kit will not fit on your vehicle.

Featuring a heavy-duty forged steel body with an additional 20mm of adjustment length over the factory tie rod ends, the 034Motorsport Extended Tie Rod End Kit for Audi or Volkswagen PQ35, MQB, and MQB Evo allows you to run Dynamic+ RCO Ball Joints and RCO Control Arms together safely and benefit from the added camber and caster gains! Manufactured utilizing a heavy-duty forged steel body, the Extended Tie Rod End Kit is perfect for both track and street driving.

Due to the amount of negative camber achieved with both Dynamic+ RCO Ball Joints and Control Arms installed, the OE tie rod ends run out of threads for safe engagement with the OE inner tie rod and will not allow for proper installation.

With an extra 20mm of adjustment length on the 034Motorsport Extended Tie Rod End Kit, the Dynamic+ RCO Ball Joints and Control Arms can both be installed together safely, allowing for further handling performance thanks to the added camber and caster. The Extended Tie Rod Kit was tested extensively and developed on 034Motorsport's MK7 GTI, 8V A3, and MK7.5 Golf Alltrack.

FEATURES:

  • Re-Engineered for Performance Driving Suspension Setups
  • Adds 20mm of Adjustment Length to the Rod End.
    • Note: This product can only be installed in conjunction with these kits, individually or together:
      • 034-401-4013, Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB & MQB EVO
      • 034-401-1068/77, Dynamic+ RCO Control Arms, Audi & Volkswagen MQB
    • If you do not have either or both of these products installed on your car, the Extended Tie Rod End Kit will not fit on your vehicle.
  • Forged Steel Body for High-Strength
  • Gloss Black Finish for Corrosion Resistance and Long Lasting Good Looks
  • Requires Alignment After Installation

Fitment Notes:

Recommended

Extended Tie Rods are recommended if running Dynamic+ RCO Ball Joints or Dynamic+ RCO Control Arms with no other camber adder.

Required 

Extended Tie Rods are required if utilizing both Dynamic+ RCO Ball Joints and Dynamic+ RCO Control Arms without the use of a camber mount such as the Dynamic+ Camber & Camster Mount or other adjustable camber mounts. Extended Tie Rods should not be utilized on vehicles without Dynamic+ RCO Ball Joints or Dynamic+ RCO Control Arms installed as they will not allow for a proper alignment (Ex: They should not be installed if your only camber adder is the Dynamic+ Camber & Camster Mount or other adjustable camber mounts).

ADJUSTMENT RANGES:

*NOTE: Adjustment ranges collected on 034Motorsport MK7 GTI running 034Motorsport Lowering Springs. All customers should verify thread engagement for tie rods depending on their setups/subframe misalignment. The minimum thread engagement is 10 threads (not including the jamb nut). *

Configuration Camber Caster
Dynamic+ RCO Control Arms (Extended Tie Rods Recommended) -1.3° to -2.5° 7.5°
Dynamic+ RCO Ball Joints (Extended Tie Rod Ends Recommended) -2.5° TBC
Dynamic+ RCO Control Arms & Dynamic+ Camber Mount -2.0° to -3.4° 8°
Dynamic+ RCO Control Arms & Dynamic+ Camster Mount -2.1° to -3.5° 9.0°
Dynamic+ RCO Control Arms & Dynamic+ RCO Ball Joints (Requires Extended Tie Rods) -2.3° to -3.7° 8.0°
Dynamic+ RCO Control Arms, Dynamic+ RCO Ball Joints & Dynamic+ Camber Mount -3.0° to -4.4° 7.5°
Dynamic+ RCO Control Arms, Dynamic+ RCO Ball Joints & Dynamic+ Camster Mount -3.1° to -4.5° 8.5°


All ranges are relative to the subframe alignment. We would recommend the following Subframe Locking Collar Upgrade Kits:

WHAT'S INCLUDED:

  • 1x Left Rod End
  • 1x Right Rod End
  • 2x Jamb Nuts
  • 2x Top Nuts

OE Part Interchange (MK7 GTI/R):

  • 1K0 423 811 J (Left)
  • 1K0 423 812 J (Right)
  • Top Nut: WHT 005 538
  • Jam Nut: N 011 164 17

Fitment:

Make Model Years Chassis Engine
Audi A3 2006-2013 8P 2.0 TDI
Audi A3 2006-2013 8P 2.0 TSI
Audi A3 2006-2013 8P 2.0T FSI
Audi A3 2006-2008 8P 3.2L VR6 24V
Audi A3 2013-2016 8V 1.8 TFSI
Audi A3 2013-2016 8V 2.0 TDI
Audi A3 2013-2020 8V/8V.5 2.0 TFSI
Audi S3 2013-2020 8V/8V.5 2.0 TFSI
VW Beetle 2012-2019 Mk6 1.8T Gen3
VW Beetle 2012-2019 Mk6 2.0 TSI
VW Beetle 2012-2019 Mk6 2.0T Gen3
VW Beetle 2012-2019 Mk6 2.5L
VW E-Golf 2015-2020 Mk7/Mk7.5 E-Golf
VW Eos 2006-2015 Mk5 2.0 TSI
VW Eos 2006-2015 Mk5 2.0T FSI
VW Eos 2006-2015 Mk5 3.2L VR6 24V
VW GLI 2008.5 Mk5 2.0 TSI
VW GLI 2005-2008 Mk5 2.0T FSI
VW GLI 2011-2013 Mk6 2.0 TSI
VW GLI 2014-2017 Mk6 2.0T Gen3 Non-MQB
VW GLI 2018-Present Mk7 2.0 TSI Gen3
VW Golf 2010-2014 Mk6 2.0 TDI
VW Golf 2010-2014 Mk6 2.5L
VW Golf 2013-2020 Mk7/MkV7.5 1.8T Gen3
VW Golf 2013-2016 Mk7 2.0 TDI
VW Golf SportWagen 2015-2020 MkV7/MkV7.5 1.8T Gen3
VW Golf Alltrack 2015-2020 MkV7/MkV7.5 1.8T Gen3
VW Golf R 2012-2013 Mk6 2.0T FSI
VW Golf R 2013-2020 Mk7/Mk7.5 2.0 TSI Gen 3
VW GTI 2008.5-2009 Mk5 2.0 TSI
VW GTI 2006-2008 Mk5 2.0T FSI
VW GTI 2010-2014 Mk6 2.0 TSI
VW GTI 2015-2021 Mk7/Mk7.5 2.0T Gen3
VW Jetta 2005-2010 Mk5 2.0 TDI
VW Jetta 2005-2010 Mk5 2.5L
VW Jetta 2011-2017 Mk6 1.4 TSI
VW Jetta 2013-2017 Mk6 1.8T Gen3
VW Jetta 2011-2015 Mk6 2.0 TDI
VW Jetta 2011-2015 Mk6 2.0L 8V
VW Passat 2006-2010 B6 2.0 TSI
VW Passat 2006-2010 B6 2.0T FSI
VW Passat 2006-2010 B6 3.6L VR6 FSI
VW Passat 2012-2019 B7 1.8T Gen3
VW Passat 2012-2019 B7 2.0 TDI
VW Passat 2012-2019 B7 2.5L
VW Passat 2012-2019 B7 3.6L VR6 FSI
VW R32 2008 Mk5 3.2L VR6 24V
VW Rabbit 2006-2009 Mk5 2.5L

 

Installation:

The installation of your Extended Tie Rod End Kit, Audi & Volkswagen PQ35, MQB, and MQB Evo is a straightforward process that will take approximately 2 hours to complete. You can access our detailed installation guide by clicking the link below.

Download the Extended Tie Rod End Kit, Audi & Volkswagen PQ35, MQB, and MQB Evo Install Guide

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 90245245779

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
Dave
Pawtucket, US
★★★★★ 1
Review from an "actual" tall person who doesn't weigh 400 pounds.
Color: Black
I recommend this chair. Firstly, I looked at least dozens of chairs and nearly every review in trying to select a chair. I didn't want to spend $200. It's confusing because everyone's idea of perfect is of course subjective. One thing, What is tall? I'm 6'6" I think that's pretty tall. Others feel that 6'0" is tall. LOL In the listing, it shows this chair is good for a 6'5" person which I think is pretty accurate. I weigh about 210 pounds and the padding is just fine. One thing I would push manufacturers to do would be to give accurate measurements. Seat height low and high. Back support height. Head rest added to back height etc.! Maybe actual human measurements that the chair is geared toward. Nice to know that 400 lbs is cool but that doesn't tell me much. My primary goal was to find a chair I could sleep in because I recently had a back injury and sleeping on my bed, while fine, resulted in intense pain trying to get up in the morning. We'll see what happens but the headrest reaches my head which was goal one. The lumbar fits so I don't need to use cushions and pads etc. I found the upper position of the support to be right for me and it's super comfortable. Plus number two. The raised height of the chair fits my long legs (inseam 36") Plus three. I wanted adjustable arm rests but this one doesn't have that. No biggie, for me the height of the arm rests is pretty much just right. It might be a little high for some. The back leaning adjustment doesn't lock except for upright. Locking upright is good, and leaning back - for me - doesn't really need to lock. Being an actual tall person made me really skeptical. I'm relieved that I won't have to take it apart to return it. The assembly was straight forward and pretty easy though I'd suggest not really tightening the arms snugly before getting the back squared away - the alignment is easier if you do that. I got the chair for $109 with 21% off. It's slightly wobbly yet feels pretty well made. It rolls well enough. I'm quite satisfied with the purchase and I'll come back if there are updates. Edit one. I've had it a week now and found I couldn't sleep in it. I think it would be better if the back could recline separately from the seat. There might also be figuring out a way to support my legs due to the back and seat reclining together rather than separately. Two. I kind of wish more now that the arms were adjustable for height and tilt if that makes sense. I have a bar stool next to me on the right in front of my desk that is the right height to relax my right arm while reaching my mouse on the desk so that's my work around there. Three. The casters are kind of basic and don't roll as easily on the floor matt as my former second hand chair - they would probably be fine on a hard surface. I'll probably switch them out. Four: The lumbar support, while mostly in the right place is unpadded and creates kind of a hard spot there. I've re-introduced my lumbar support pillows for comfort there. All in all, I'm still happy with the $100 purchase. In my experience, being pretty tall always comes with compromise and these notes are not deal breakers for me. Yea, It can always be more perfect but unless you're in a showroom test driving and willing to spend $300? Right. UPDATE: I'm really not satisfied with this chair and in fact, I wish I hadn't bought it. Firstly, the pneumatic post that the chair part connects with is wobbly depending on which way it is facing according to which way the legs are aligned. It's like a poor fit and I'm pretty mechanically inclined. Second and also important. The lock to keep it upright and inclined only worked for a few weeks. For a while, you had to mess with it to engage the upright position. It no longer works. Worse than that, the lumbar support pad disconnected with the chair and is now floating and after only a month or so, the remaining supports for the Lumbar rest have dug into the fabric on the back of the chair creating holes in the back's fabric. I've tried but there is no way to reconnect that bit without removing the back's fabric as far as I can see. I'm taking this down to one star for sure. Poor design? Poor manufacturing? Yea. I wouldn't suggest this chair to anyone. If the company comes up with a solution, I'll continue my review. As for now. Not a recommendation. Update: Not impressed and kind of crappy. Mentioned is that the so called lumbar thingy disconnected and is unusable. I've got my own pad which seems to help. Also, it's wiggly where the chair connects to the base. Months later, I might toss it and go back to the chair I bought locally and second hand. Don't buy this chair!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2025
Q
Verified Purchase
QZ
Pawtucket, US
★★★★★ 5
Great Instructions, Straightforward Assembly
Color: Black
I just received this chair today, so my product review is mostly on the packaging, instructions, and assembly. The product was well-packaged, and it was obvious when I unboxed it that a lot of care and thought went into packing it in the most efficient way that would also protect the parts. I was positively impressed with the packaging. I was also incredibly impressed with the instructions and assembly process. I am used to cheaper products where the parts only half fit or important components are missing, or where the instructions were confusing and unclear. This chair's instruction manual was very clear and concise. The diagrams were easy to understand and neat. The screws came labeled and separated and also included the scew types and sizes/lengths, which is handy in case you need to pick up extras at a store somewhere. But they also included one extra of each type of screw, washer, and cover, which I appreciated during assembly. (I didn't find myself worrying what would happen if I dropped a screw, which is something I would normally be distsracted by while working.) The only things I would take points off for were these: 1. The instructions said the chair came with gloves for assembly, but no gloves were included. That was fine with me, but why mention them if you won't include them? The instructions even later say not to use the chair if not all components were present...but all the important ones were, so I assembled it without gloves (as I probably would have done anyway, since it was for me and not another person). 2. It matters which side of the seat is the front, but the sticker was confusing. The instructions show a sticker placed on the side that is the front, and that is where my sticker was placed. However, the sticker says "FRONT" and has an arrow pointing somewhere. In the instructions this arrow pointed to the front. On my seat, however, the arrow pointed to the back. So am I supposed to believe the sticker placement (it was diagonal, so it looked haphazardly slapped on) or the arrow? On that particular step the piece you are screwing into the seat can fit both ways, but thankfully there is a later step where it becomes obvious which side is the front vs. the back. (The arm rests can only be attached to the back.) So I wish that had been clearer up front, but otherwise it was okay. Recommendations for assembly: - To attach the wheels, apply firm, direct, straight-down pressure. I tried screwing them on at first but you just push. Make sure they go in the whole way like the picture shows. - When they say to tighten the screws to only 60%, it's a helpful tip, because you can't fit the armrests on both the seat and chairback at the same time with the screws completely tightened. Just tighten them enough to fit the pieces on, then later you can tighten up the screws. So far I find the chair to be very comfortable and I'm exceedingly happy with it. The lumbar support seems like it could potentially be a little chafy or scratchy, but I'll give the chair a chance before deciding if it's problematic or not. Like I said, I only got the chair today, so I can't speak much to its long-term comfort, durability, or longevity. But I was so impressed with how easy and straightforward they made the assembly that I had to write a review to show my appreciation.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
A
Verified Purchase
Alicia Sherman
San Leandro, US
★★★★★ 3
It's okay
Color: Black
Appeared to be a super comfortable chair. Purchased for my mother to work from home and the material is apparently slightly itchy and the arm rest isn't quite comfortable. It was pretty simple to put together but it did take some time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2026
C
Verified Purchase
Corbin
Lexington, US
★★★★★ 5
An Actual Nice Chair for a Decent Price. +2 for the Tool.
Color: Black Grey
Welp, My old chair finally broke, so It was time for a new one. I ended up coming across this chair here, and I couldn't really find anyone talking about it online. I decided to give it a shot since it was on a good sale for Christmas, going down to 99$. I'm going to be honest, I am pleasantly surprised. The cushioning for it is a little firm, but that is perfect for me. Its pretty average when it comes to office chairs, but having the added lower back support is a great touch. I have no complaints about it. The one thing that I am actually really happy about isn't on the chair. Don't get me wrong, over the week I have been using it, It has been nothing but great. That thing is the actual tool it came with. Its a basic Allen key, but the top of it is a molded handle instead of a "L" piece of metal. It made the already easy process of putting together this chair even better. Even after this chair has ran its course like all other chairs, I'm going to still use this tool. So yeah, I think 5 - stars pretty accurately describes how I feel about my chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2026
C
Verified Purchase
Christian Birkenberger
San Leandro, US
★★★★★ 5
Comfortable chair that works great for long hours
Color: Black
I’ve been using this office chair for a few days and it’s been very comfortable for working and longer desk sessions. The high back design and ergonomic support help maintain good posture, while the cushioning stays comfortable throughout the day. The chair feels sturdy and stable, and the 330 lb capacity gives it a solid, durable feel. It also rolls smoothly and quietly, which is nice when moving around the workspace without creating a lot of noise. Overall, it was easy to assemble, looks professional, and offers great value for the money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 10, 2026

recommand products

Premium Jersey Under scarf-Rose Taupe
10.00
Premium Jersey Underscarf-Mocha Brown
10.00
Premium Jersey Cross Front Underscarf-Vanilla
15.00
Luxury Chiffon Hijab-Blue Grey
20.00
Pre-Sewn Jersey Hijab-Forrest Green
25.00