Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
HALTECH Elite 2500 + GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness Kit Injector Connector: Bosch EV6 (as per factory)Suits: Common US style Delco Bosch GM alternator connector. Pre wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. Includes: Elite 2500 ECU with DBW and Race Functions. engine harness with fuse block, firewall grommet, USB programming cable and USB Software Key. Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT 040090 or HT 040091)
Suits: Common US style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only.
Includes: Elite 2500 ECU with DBW and Race Functions. engine harness with fuse block, firewall grommet, USB programming cable and USB Software Key.
Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
OVERVIEW
The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
- efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
- quick start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle.
- guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU OVERVIEW
Haltech's Elite 2500 T takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 T provides engine calibrators the tools they need to get the job done right. Alongside this ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
- Supports 1 to 12 Cylinder engines
- 2 to 4 Rotor engines
- Normally aspirated or forced induction
- Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
- Staged, Sequential, semi sequential, batch or multipoint injection patterns
- Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
- Connect to a wide range of display dashes and expansion devices via CAN.
- Waterproof Case (With Pocket Cover Fitted)
- 8 x Fuel Injection Outputs
- 8 x Ignition Outputs
- 12 x Digital Outputs
- 10 x Analogue Voltage Inputs
- 4 x Synchronised Pulsed Inputs
- 4 x Dedicated inputs (Dual Knock, ignition Switch & onboard MAP Sensor)
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB Laptop communication (Windows)
- ESP Calibration Software - Intuitive and easy to use
- harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
- programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
FEATURES
ECU FEATURES
- Drive by Wire Throttle Control (DBW) - Requires (2) user defined outputs & (4) user defined inputs
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time
- Flex Fuel Function (Direct sensor input) - Tune your engines boost, fuel and ignition by ethanol content
- Flexible tuning setup for Petrol (Gasoline), LPG, Methanol and Ethanol allows you to simply select your fuel type
- Closed Loop 02 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit)
- Dual Channel Knock Control - Synchronised to engine position with high speed digital filtering for accurate detection
- Variable cam control - Independently control up to 4 camshafts - Requires a minimum of 1 user defined input & output per variable cam
- Closed Loop Idle Speed Control with learning for consistent idle stability Requires 1 or 2 user defined outputs (BAC type) or 4 user defined outputs (Stepper motor type)
- Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D)
- On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory
- Laptop data logging -Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics
- Dual CAN Bus communication for Haltech Dashes and expansion devices, Supported OEM CAN & OBDII (view live engine data & set and clear diagnostic trouble codes)
- Injection Stages 1 - 4 with individual injector flow rates per injector
- 8 Injector drivers for 2 sequential stages on 4 cylinder & 3 rotor engines and up to 4 sequential stages on 2 rotor engines
- Anti-Lag/Rotational idle - for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions
- Rolling Anti-Lag - lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting
- Launch Control - Control your engines power delivery, RPM & boost for consistent performance at the start line
- Traction Control - Control your engines power output via mappable front vs rear axle or individual wheel speed slip.
ADVANCED TUNING
- Tuning Table Resolution up to 32 x 32 x 8
- Limitless tuning flexibility -Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections
- tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height or any channel for ultimate flexibility - Dual mapping is a thing of the past.
- Per Cylinder Tuning Correction - 3D
- Wideband O2 - Connect up to 9 Channels via CAN expansion devices
- Thermocouples/EGT (Exhaust Gas Temperature) - Connect up to 12 Channels via external CAN expansion devices
- Engine Protection - Set advanced multi-level limits for sensors and protect your engine against common causes of failure
RACE FUNCTIONS
- Nitrous control with advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays & banked control options.
- fuel and ignition corrections for all stages.
- Boost Control -Intelligent 4D Closed loop, with learning, flexible user definable axis and 14 fully user definable boost target and duty cycle corrections.
- modes - example boost by gear, road speed, race timer, shock travel, ride height etc.
- Sequential turbo control
- CO2 Boost control, wastegate pressure & position, intake air bleed control (charge pipe wastegate) functionality for the hard-core racer
- Flat shift - Optimise your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
- Shock Travel/Ride Height inputs allow dynamic tuning and data logging to assist in chassis development and power delivery
- Timer Functions - Use the combination of the race timer and 5 additional programmable timers for time based control of multiple engine parameters, power delivery and other user definable functions
- Trans brake function allows smooth and consistent control of start line staging (Bump or Creep)
- Advanced Torque Management - A fully integrated driveshaft RPM target race function that provides the ultimate control and consistency for the serious drag racer, eliminating the need for costly external controllers
RESOURCES
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 2024 reviews
Sort
Product Reviews
★★★★★ 4
Glad I chose these Sturdy, Fluffy Pillows
Color: White, Size: 18x18 Inch
Took me forever to decide which pillows to buy....Price won out. There might be better out there, but I really can't see how. They plumped up really nicely. I once learned from a manager at a big box dept store when purchasing a goose down pillow how to 'activate' the pillow. Basically, he violently threw the pillow down onto the floor, then proceeded to beat the tar out of it....That's how it's done. I think many ppl don't do a good enough job when they get their pillows. I watched several videos from ppl who have purchased this type of pillow. And quite frankly, they do not know what they are doing....My pillows are very plump and awesome. I purchased the 20" squares and then chose 18" pillow covers to stuff them into. Perfection. Fat, soft, soothing pillows. Me and my Doggo are quite happy to lounge around on these durable puffs of fluffiness.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
★★★★★ 5
Excellent Inserts. Great price point.
Color: White, Size: 12x20 Inch
I purchased the 20x20 first and loved them so much, I purchased these the next day. They come vacuum sealed so please do be careful opening them. It takes a little time and patience. These fluff up so nicely. I manipulated by hand a bit then into the dryer with wool dryer balls on medium heat for about 20 minutes. They are odor free which is a big plus for me and the quality is there for the price. I can't use feather inserts for anything so these are the next best I've found at this price point. I will be purchasing more and I do recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
★★★★★ 5
Fluffy and Supportive Pillow Inserts
Color: White, Size: 12x20 Inch, Color: White, Size: 12x20 Inch
I used these pillow inserts for my couch cushions, and they’ve worked out really well. They give my throw pillows a nice full look without being too stiff or flat, which makes the couch feel more put together and comfortable.
Filling quantity: They’re nicely filled and give good shape without feeling overstuffed.
Durability: They seem well-made and hold their shape well even after daily use.
Color: Clean, bright white that works well with different pillow covers.
Appearance: They make my decorative pillows look fluffy and full, giving the couch a more finished look overall.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
★★★★★ 5
Exactly what I was looking for
Color: White, Size: 26x26 Inch
I bought these to fill some euro pillow covers and they worked out really well. They come vacuum packed, so at first they look flat, but once you open them and give them a little time, they fluff up nicely.
They are soft but still have enough structure to hold their shape on a bed or couch, which is exactly what I was looking for. Not overly firm, but not limp either. They give that full, styled look without feeling stiff.
The size is true to 26x26 and fills the covers well without looking saggy. I like that they don’t feel hollow like some cheaper inserts can.
Quality feels good for the price. They are not luxury pillows, but definitely a solid option for decorative use and they hold up well.
Overall, really happy with them and would buy again for other rooms.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026
★★★★★ 5
Smells amazingly like cherry, but expect a mess under the feeder.
Style: Wild Bird Food, Style: Wild Bird Food
This is a fantastic budget seed blend to keep your backyard feeders full during the busy seasons. I put a banana in the picture next to this massive 10-pound bag for scale, though I wouldn't recommend leaving the fruit out there unless you want to feed the local raccoons instead. The most surprising part of this bag is the smell—it has a very strong, sweet cherry scent right out of the bag that genuinely seems to bring in the local cardinals and blue jays faster than plain seed.
THE GOOD:
• The cherry flavoring actually works as an attractant, and the sheer volume of seed you get for the price makes this an excellent value for high-traffic yards.
• It brings in a huge variety of ground-feeding birds, especially mourning doves and juncos.
THE TRADE-OFF:
• This is a "value" mix, which means it contains a very high percentage of filler seeds like milo and cracked corn. Finicky songbirds will actively kick the milo out of the hanging feeder to get to the black oil sunflower seeds, creating a massive pile of rejected seed on the ground.
THE BOTTOM LINE:
A great-smelling, budget-friendly birdseed that attracts a ton of wildlife, provided you don't mind the ground-feeders cleaning up the mess underneath.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026