Capristo Porsche 992 - Valved Exhaust Muffler for OEM Cats (CES3 Version)

Capristo Porsche 992 - Valved Exhaust Muffler for OEM Cats (CES3 Version)**fits the Porsche 992 Carrera S and the 992 Turbo S** Porsche 992 Carrera S Dyno Proven Gains of 4. 9 PS and 18. 7 Nm (4. 83 hp 13. 79 lb ft) The CES3 Version of this system replaces the OE Electric Actuators with block off adapters, and then uses vacuum actuators to provide Stand Alone Control of the valves independent of the factory monitored control, thus allowing valves to be left open at idle and open earlier in RPM range Stock: 451. 5 PS @

**fits the Porsche 992 Carrera/S and the 992 Turbo/S**

Porsche 992 Carrera/S – Dyno Proven Gains of 4.9 PS and 18.7 Nm (4.83 hp / 13.79 lb/ft)

The CES3 Version of this system replaces the OE Electric Actuators with block off adapters, and then uses vacuum actuators to provide Stand Alone Control of the valves independent of the factory monitored control, thus allowing valves to be left open at idle and open earlier in RPM range

Stock: 451.5 PS @ 7098rpm / 567.2 Nm @ 3442rpm

Capristo: 456.4 PS @ 6610rpm / 585.9 Nm @ 3299rpm

The iconic CAPRISTO Valved Exhaust System offers the best of both worlds through its capability to produce an aggressive exhaust note under acceleration, and a more subdued sound for city driving.

This feature is possible using vacuum-actuated valve flaps that open and close depending on driving conditions and input from the driver. At lower engine speeds and during cruise operation the valves are closed and produce a deeper exhaust note. At wide-open throttle, the valves open releasing the full symphony of the engine.

The new Capristo exhaust valves on the 992 are electronically controlled and integrate the OEM Actuators to maintain factory valve operation via the Sport Control.

 This allows precise control of the exhaust based on the drivers personal tastes and tolerance without any additional electronics/modules/remotes.

CAPRISTO Exhaust systems are engineered and manufactured utilizing advanced 3D Laser-Scanning, CAD Design, Digital prototyping, and CNC-bending/milling at our factory in Germany. Each system is made of high-grade T309 (1.4828) Stainless Steel and hand polished to a mirror finish. After extensive research, this specific alloy was chosen for its sonic resonance properties, low weight, and durability which are close to the properties of Inconel (used in F1).

IMPORTANT

*The exhaust system is designed to be installed directly into existing OEM mounting points*

Capristo Valved Muffler (with OEM Cats)