Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
HALTECH Elite 2500T + Terminated Harness Kit For Ford Falcon FG Barra 4.0L I6 Injector Connector: Factory Bosch EV1Suits: Ford Barra Engine found in FG Variants Barra 270T FG, 310T, 325T Includes: Elite 2500T ECU Terminated Harness & Fuse Block HPI 6 Ignition Module (HT 020036) Quick Start Guide Connector Pack Notes: Suits Factory Bosch EV1 injector connectors Includes Engine Harness, & Fuse Block Kit, Includes pre wired HPI6 15AMP 6CH ignition module and factory coil ignition harness OVERVIEW Harness Overview The fastest and most cost effective way to wire your
Suits: Ford Barra Engine found in FG Variants Barra 270T FG, 310T, 325T
Includes: - Elite 2500T ECU - Terminated Harness & Fuse Block - HPI 6 Ignition Module - (HT-020036) - Quick Start Guide - Connector Pack
Notes: Suits Factory Bosch EV1 injector connectors - Includes Engine Harness, & Fuse Block Kit, Includes pre-wired HPI6 15AMP 6CH ignition module and factory coil ignition harness
OVERVIEW
Harness Overview
The fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
- An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
- The quick start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle.
- The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU OVERVIEW
Haltech's Elite 2500 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 2500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
- Supports 1 to 12 Cylinder engines
- 2 to 4 Rotor engines
- Normally aspirated or forced induction
- Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
- Staged, Sequential, semi sequential, batch or multipoint injection patterns
- Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
- Connect to a wide range of display dashes and expansion devices via CAN.
- Waterproof Case (With Pocket Cover Fitted)
- 8 x Fuel Injection Outputs
- 8 x Ignition Outputs
- 12 x Digital Outputs
- 10 x Analogue Voltage Inputs
- 4 x Synchronised Pulsed Inputs
- 4 x Dedicated inputs (Dual Knock, ignition Switch & onboard MAP Sensor)
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB Laptop communication (Windows)
- ESP Calibration Software - Intuitive and easy to use
FEATURES
Harness Features
- This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
- Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
ECU FUNCTIONS
- Drive by Wire Throttle Control (DBW) - Requires (2) user defined outputs & (4) user defined inputs
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time
- Flex Fuel Function (Direct sensor input) - Tune your engines boost, fuel and ignition by ethanol content
- Flexible tuning setup for Petrol (Gasoline), LPG, Methanol and Ethanol allows you to simply select your fuel type
- Closed Loop 02 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit)
- Dual Channel Knock Control - Synchronised to engine position with high speed digital filtering for accurate detection
- Variable cam control - Independently control up to 4 camshafts - Requires a minimum of 1 user defined input & output per variable cam
- Closed Loop Idle Speed Control with learning for consistent idle stability Requires 1 or 2 user defined outputs (BAC type) or 4 user defined outputs (Stepper motor type)
- Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D)
- On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory
- Laptop data logging -Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics
- Dual CAN Bus communication for Haltech Dashes and expansion devices, Supported OEM CAN & OBDII (view live engine data & set and clear diagnostic trouble codes)
- Injection Stages: up to 4 with individual injector flow rates per injector
- 8 Injector drivers for 2 sequential stages on 4 cylinder & 3 rotor engines and up to 4 sequential stages on 2 rotor engines
- Anti-Lag/Rotational idle - for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions
- Rolling Anti-Lag - lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting
- Launch Control - Control your engines power delivery, RPM & boost for consistent performance at the start line
- Traction Control - Control your engines power output via mappable front vs rear axle or individual wheel speed slip.
ADVANCED TUNING
- Tuning Table Resolution up to 32 x 32 x 8
- Limitless tuning flexibility -Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections
- tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height or any channel for ultimate flexibility - Dual mapping is a thing of the past.
- Per Cylinder Tuning Correction - 3D
- Wideband O2 - Connect up to 9 Channels via CAN expansion devices
- Thermocouples/EGT (Exhaust Gas Temperature) - Connect up to 12 Channels via external CAN expansion devices
- Engine Protection - Set advanced multi-level limits for sensors and protect your engine against common causes of failure
RACE FUNCTIONS
- Nitrous control with advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays & banked control options.
- fuel and ignition corrections for all stages.
- Boost Control -Intelligent 4D Closed loop, with learning, flexible user definable axis and 14 fully user definable boost target and duty cycle corrections.
- modes - example boost by gear, road speed, race timer, shock travel, ride height etc.
- Sequential turbo control
- CO2 Boost control, wastegate pressure & position, intake air bleed control (charge pipe wastegate) functionality for the hard-core racer
- Flat shift - Optimise your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
- Shock Travel/Ride Height inputs allow dynamic tuning and data logging to assist in chassis development and power delivery
- Timer Functions - Use the combination of the race timer and 5 additional programmable timers for time based control of multiple engine parameters, power delivery and other user definable functions
- Trans brake function allows smooth and consistent control of start line staging (Bump or Creep)
- Optional Upgrade - Advanced Torque Management - A fully integrated driveshaft RPM target race function that provides the ultimate control and consistency for the serious drag racer, eliminating the need for costly external controllers
RESOURCES
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 1663 reviews
Sort
Product Reviews
★★★★★ 5
Outstanding Frother!
Color: Space Gray
Exceptional! This frother is in another league compared to the cheapo push button frothers. The motor is smooth, quiet and powerful. This has an intuitive thumb dial on top that operates smoothly with a wide range of smooth speed adjustment. It’s gentle enough to froth a little bit of milk for a macchiato and powerful enough to scramble 3 eggs. The head is removable for easy cleaning. It’s also rechargeable. I charged this the day I bought it on April first. I use it at least twice a day. It’s September 26th today and I have yet to recharge it and it’s not showing any signs of needing a charge. One minor quibble is that they give you 2 of the same frother heads. They are built so well, that I don’t imagine it ever wearing out. It would have been nice to get a whisk or something different. Not a deal breaker at all though.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 26, 2025
★★★★★ 5
Solid unit
Color: Black
Handheld Mixer/Frother Review
A Premium Choice That Transforms Morning Coffee
I am thoroughly impressed with this handheld mixer and frother. Each morning, I blend cacao and collagen powder into my coffee, and in the past, I always ended up with stubborn lumps using only a spoon or whisk. I had previously purchased a few inexpensive handheld mixers, but they disappointed me both in price and performance, struggling to mix the powders thoroughly—especially at the bottom of the cup. I came close to abandoning handheld mixers altogether, but decided to give it one last try.
After reading countless reviews and carefully comparing models, I opted to invest in a higher-end handheld mixer. The anticipation was high—would this mixer truly distinguish itself from the budget options cluttering my kitchen drawer? From the moment I unboxed it, the difference was clear. The mixer felt substantial in my hand, and the build quality reflected thoughtful engineering.
While this model cost roughly twice as much as the cheaper alternatives, it proved to be well worth the investment. Initially, I was concerned about the dial at the top, fearing it might be difficult to control. However, I was pleasantly surprised by its intuitive operation. The unit offers a solid feel, plenty of power, and a versatile range of speeds—from a gentle stir perfect for coffee to an impressively fast setting.
I had not previously considered using this mixer as a frother, but as a cappuccino enthusiast, I decided to give it a try. I heated both 2% milk and oat milk to take the chill off, then submerged the mixing wand. Allowing the mixer to rise above the milk introduced air and created a rich, creamy foam—an unbelievable result. My homemade cappuccino now tastes like something from a café.
The controls are robust, the construction is reliable, and the power is consistent. Cleanup is effortless, requiring only a quick rinse under the tap. The battery life is also noteworthy, lasting through several uses without losing strength.
If you are hesitant to spend a bit more on a quality handheld mixer, I wholeheartedly recommend making the investment. This mixer has become an essential part of my morning routine. Excellent product—well done!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 13, 2025
★★★★★ 5
Solid, powerful, rechargeable
Color: Black
Very impressed with its weight, speed and performance. The dial is great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Very nearly the perfect frother for all your basic frothing & mixing needs
Color: Black
There are a lot of middle-of-the-road frothers out there. I've been through a few of them in my recent search for something that could mix and froth well, without taking up any more outlets in my basement kitchen. Of the three Maestri frothers I've tried so far, this one wins the race by a nose.
Most recently, these Maestri frothers come in basically three versions: A single-speed @ 8000 RPM, a two-speed @8000/5500 RPM, and this stepless variable-speed version. Aside from that, the only real difference in recent version pack-outs is which attachments they come with.
Look over the reviews of the single-speed version and you'll find that while it can and does froth well, it starts at a single, high speed and gets there fast. This makes it pretty easy to spin liquid right out of most common cups and mugs.
There is a two-speed version, but it's harder to find, only comes in one color (Grape Purple), and while it's much better than the Maestri single-speed, it still has a couple of quirks that make this variable-speed version win out.
This mixes and froths whole milk, half-and-half, or heavy whipping cream, or just about anything else very well. Like all frothers, it takes a little time to learn its nuances and nail down the technique, this will definitely get you there.
The best feature of this is easily the speed control. Turn the knob to turn it on at a low speed that's great to get things started, then turn the knob to crank up the speed just enough to do what you need, whether that's mixing or frothing. The low starting speed makes it easy to keep things under control without undue spilling, and the max speed is more than enough to make quick work of getting your froth on.
There are really only two complaints I have with this stepless, variable speed version:
- I'd really like to have a Press On / Release Off button in addition to the Speed Control knob. More than one time have I gone to turn this off, only to spin the knob the wrong way and crank the speed up to ludicrous, sloshing liquid on the counter. Being able to turn it Off just by letting go of the button would be quick and easy. This configuration would allow using a preferred speed right from the start, while still allowing speed to be adjusted on-the-fly when needed.
- Give it a bigger battery. It would cost mere pennies to give this a 2000mAH+ instead of a 1200mAH battery, and I can't think of any reasonable downside to that.
- Give the motor a little more torque. It's fairly easy for the current motor, at any speed, to get bogged down in a thick protein powder mix, or when pressing the frother or other attachment a bit too hard into the bottom or side of the frothing container. A bit more "oomph" would prevent that.
I really like the overall design and features of thes Maestri frothers better than many other, cheaper versions. This variable-speed version is pretty great as it is and probably the one I would recommend over the single- or two-speed, for most people. But I often find myself using two hands -- one to hold it steady, and the other to turn it on and tweak the knob to the desired speed(s) -- for a device that should arguably need only one hand to use. Just a couple of minor tweaks as noted above would make this the overall best frother of its type that I've used.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2025
★★★★★ 5
Hands down, the BEST handheld frother I've ever used!
Color: Black
Hands down, the BEST handheld frother I've ever used! I got the black one, but any color will have the same results.
Over the past 12 years or so, I've used so many different handheld frothers and they've ALL fallen short of expectations for quality, longevity, power, features, and usability.
I've used everything from cheap, $15 models to $50+ models and everything in-between. Some with fancy attachments for various types of mixing, frothing, beating, whipping, etc. Some with rechargeable batteries, some without. Some AC powered, some with fixed whisks, some with detachable/replaceable whisks, some with stands, etc. NONE have been spectacular. Most broke within 6 months and got tossed. ALL were major disappointments in the end, including the "revered" Zulay models of which I tried several.
I finally found this Maestri House branded, variable speed frother with detachable / replaceable whisks and got one to try. I was literally on Cloud Nine the first time I turned it on. Like, WOW! Not only was it FAST on the highest speed, but it was powerful enough to churn right through milk, eggs, cream, etc, without bogging down like many others.
This thing makes milk froth like a milkshake and Matcha Lattes like nothing else I've ever experienced. I used to have to sift my Matcha, then whisk it in hot water, then froth milk and then blend them together to make the perfect latte. and if the milk was cold (my preference), pre-whisking in hot water was a must to avoid lumps. However, with THIS frother? I literally pour my milk into a tall tumbler, drop in un-sifted Matcha powder, and spin up the Maestri House frother at first on a medium low speed to get it mixed, then jump straight to the highest speed to really whip that milk and match up. After about 30-45 seconds, I've got the thickest, richest, smoothest, most aerated latte around. And NO LUMPS at all!!! What a time and dish saver!
And cleaning? I just run it under hot running water to get the shaft cleaned and then spin it up in a dish with hot running water for a few moments, then spin it on high for a few seconds in the air to dry it off instantly.
Now, I'll be honest here, too. The specs say it can go months on a charge, using it for a couple minutes a couple times daily. Well, I guess it could do that and still spin. But I use it FULL SPEED, churning hard for at least a minute a couple times per day. After about 2 weeks, I can start to notice a speed reduction so I just plug it back in on the charger. All things considered, this is still better than all the other handheld frothers I've used over the years.
After using the heck out of this thing for the past 7 months, I've even decided to start selling these in our Japanese gift shop. The manufacturer is has been very responsive both in customer support (I called them about an issue I thought I was having, and they called me back with a couple hours even though I didn't leave voicemail when they didn't answer right away) and in reseller support. I have to give these guys an A+ for responsiveness and quick resolution when problems might arise.
HIGHLY recommended!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 17, 2025