Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Edelbrock 1403 500 CFM With Electric Choke, Satin Finish (Non-EGR)My name is Riley I am a freshman in College and I rebuild Edelbrocks to fund my car jeep projects and pay for school. I have been doing it for four years and I am really good at it. 1403 500cfm Electric Choke Edelbrock, you choose the finish at check out; Driver Quality, Show Quality or Brand new from Edelbrock, you choose which you want at check out. They are all 100% ready to bolt on. I rebuild every carb, regardless if it needs it or not. The
My name is Riley I am a freshman in College and I rebuild Edelbrocks to fund my car/jeep projects and pay for school. I have been doing it for four years and I am really good at it.
1403 500cfm Electric Choke Edelbrock, you choose the finish at check out; Driver Quality, Show Quality or Brand new from Edelbrock, you choose which you want at check out. They are all 100% ready to bolt on. I rebuild every carb, regardless if it needs it or not.
The process is the same each time, I completely strip them down, soda blast them in the blast cabinet, then hot tank them in an ultrasonic cleaner. I rebuild them using ONLY original Edelbrock rebuild kits (I don't use knock off kits, they stink). If the jets or rods have been changed, I put in new original ones from Edelbrock. I put everything at factory spec: Floats 7/16 at closed, Bleed screws at 1.5 turns out from seated, Idle screw at 1.5 turns from beginning to open blades, Jets and rods checked to make sure they are OEM, accelerator pump on middle hole. I spray all my rebuilds with Sharkhide, it will protect the aluminum from oxidizing for a few years.
I will send the base gasket and aircleaner gasket with the rebuild. The price includes shipping in the continental US.
I've been rebuilding carbs with my dad since I was 14, and he oversees everyone I do (He made me put this in the ad). I have made enough to buy my first car (95 YJ Jeep) and pay for all the parts (2.5" lift kit, body work and paint (It is a Jurassic park jeep)). now I am on to saving up for college.
If you have an old Edelbrock laying around, I will rebuild it for you, or buy it. Send me a message.
Thanks for supporting a young gear head.
Edelbrock, Carb, Carburetor, Carborator, 1405, 1406, 1407, 1411, 600cfm, 650cfm, 750cfm, 850cfm, cfm 3265
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 2432 reviews
Sort
Product Reviews
★★★★★ 5
Highly recommended
Style: -20-Degree, Size: 25-Foot
I’ve been using this hose for several years now. Plug it in and it heats the hose whenever the temperature drops to 40 or less. My hose has made it through several freezes and works 24/7 with no problems. I will buy another when the times comes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 3, 2026
★★★★★ 1
BOUGHT 2 AND BOTH TERRIBLE
Style: -20-Degree, Size: 50-Foot, Style: -20-Degree, Size: 50-Foot
I bought two of these products 6 months apart from each other (march 2024 and October 2024) both brand new out of the box leaked from this hose connection fitting and is not fixable by replacing the standard hose gasket. Thought maybe it was just the first one was just a dud. It was not, the 2nd one was exactly the same and leaked out of BOTH connection fittings aswell. Yes i tried new gaskets, thread tape / dope, trying to tighten it a bit more, pressure reducer down to abt 35 psi. None of which worked. This product has potential of being good but they used such a low quality connection that it ruins the whole thing. Havent gotten to the point where Ive used it below freezing for more than 1 night so I cant comment on the freeze proofness of it. Tested it with an electrical meter and it uses 690W when plugged in and below the temp rating. I ended up having to repair the hose myself because I couldnt order a chinese brand one instead without running out of time before freezing temps (photographed repair of what is necessary for this to funtion propertly out of the box) but for the price point this hose is at I expect it to last at least 2 years without issues at least, I especially DO NOT expect it to leak being brand new out of the box. If you are going to do the repair you have to carefully cut the insulated sleeve back a few inches without cutting the hose or heated wire and then cut the original hose connector off. At that point you can use pretty much any hose repair threaded connector with a hefty hose clamp nice and tight (dont strip the hose clamp threads though). After spending another 15 min on the repair and $10 in parts you will then have a functional hose for at least 1 week. We'll see how long it lasts now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 7, 2024
★★★★★ 5
Hasn't froze yet
Style: -20-Degree, Size: 25-Foot
Ive been using this for 2 winters now. Its not lost its color, its not kinked, its still rigid and sturdy. It rolls up compact and fits into storage easy when warm. It can be difficult when cold. Easy to use, you just need typical wall power and a water source. Its been buried in nearly a foot of snow and single digit cold and hasn't froze yet.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
★★★★★ 5
A 5 year sentence
Style: -20-Degree, Size: 50-Foot
I’ve had this hose for 5yrs and it just sprang a leak and now I need to replace it lol. I’d say that’s pretty damn good for a hose that gets constant daily use. When the weather gets into the sub zeros it does freeze up, even with added heat tape and foam insulation around it all buried about half a foot underground.
All in all, even with the freezing I’d say it was a great hose, very durable, not too stiff but a durable firmness, it connected very easily and with the thread tape on it never leaked.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 8, 2025
★★★★★ 5
Smart, Well-Built RV Sewer Hose Support
Size: 30-Foot
I’m quickly becoming a fan of Camco products—they’re smartly designed, well-constructed, and a great value. This 30-ft Sidewinder sewer hose support performs perfectly, providing a smooth and stable transition from the RV’s discharge hose to the septic system. I especially appreciate the Velcro storage strap that keeps everything neatly together when not in use. It’s flexible, durable, and easy to handle. Highly recommend this product to any RV owner looking for a reliable and practical hose support solution. Tip: Always get a longer support than your actual sewer hose length so that you can double up the support were needed. The support can never be too long, but too short could cause flow issues during your camping trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2026
recommand products
Callebaut White Chocolate Crispearls 800gm
15.55
Casanova Neri Brunello Di Montalcino White Label 2016 750
77.99
Vie Di Romans Friuli Isonzo Pinot Grigio Dessimis 2018 750
31.99
Casanova Di Neri Brunello Di Montalcino Cerretalto 2015 750ml
210.00
Clos I Terrasses Clos Erasmus Priorat 2018 750
134.50