SKU: 64333069746

Holybro Pixhawk 6X Autopilot PX4 Kit

Sale price$103.26 Regular price$114.73
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Holybro Pixhawk 6X Autopilot PX4 KitInside the Pixhawk 6X, you can find an STMicroelectronics based STM32H753, paired with sensor technology from Bosch, InvenSense, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications. The Pixhawk 6X's H7 microcontroller contain the Arm Cortex M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. The PX4 Autopilot takes advantage of the increased power and RAM.

Inside the Pixhawk®​ 6X, you can find an STMicroelectronics​® based STM32H753, paired with sensor technology from Bosch®​​, InvenSense®​,​ giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.

The Pixhawk® 6X's H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. The PX4 Autopilot takes advantage of the increased power and RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.
The FMUv6X open standard includes high-performance, low-noise IMUs on board, designed for better stabilization. Triple redundant IMU & double redundant barometer on separate buses. When the PX4 Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability.

An independent LDO powers every sensor set with independent power control. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances.

External sensor bus (SPI5) has two chip select lines and data-ready signals for additional sensors and payload with SPI-interface, and with an integrated Microchip Ethernet PHY, high-speed communication with mission computers via ethernet is now possible.

The Pixhawk®​ 6X is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application.

The Rev 8 Version is supported in the PX4 1.14.3 release or later, as well as the Ardupilot 4.5.0 stable release or later. It ships with PX4 firmware by default. User can also use Ardupilot firmware by flashing the firmware via Mission Planner or QGroundControl.

Features

  • High performance STM32H753 Processor
  • Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk®​ Autopilot Bus connector.
  • Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
  • Triple redundancy domains: Completely isolated sensor domains with separate buses and separate power control
  • Newly designed vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
  • Ethernet interface for high-speed mission computer integration
  • IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs

Pixhawk Baseboard v1 to v2

  • The Pixhawk Baseboard v1 has been replaced by the v2A & v2B, with the following updates
  • Smaller and More Compact Design: The overall footprint of the board has been reduced, making it easier to integrate into various applications.
  • New Robust Pin Header Design: Improved reliability with a improved pin header housing.
  • Added PWM Level Shifter: Allows PWM output signal levels to be switched from 3.3V to 5V via a resistor.
  • Change to Aluminum CNC Case: High-quality aluminum CNC outer case offers durability, efficient heat dissipation, corrosion resistance, aesthetic appeal, and EMI shielding.
  • Two Models Available: Model A and Model B, each with the pin header facing different directions for more flexibility in installation.
  • Relocated of Ports: UART4 & I2C, SPI, AD & IO, DSM RC, and JST USB ports have been moved from the top to the side of the board. AUX7, AUX8, and SBUS_OUT/RSSI_IN move to the side in a JST-GH Port.

Specifications

  • FMU Processor: STM32H753
  • 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
  • IO Processor: STM32F100
  • 32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM
  • On-board sensors
  • 3x ICM-45686 IMU sensors (±32g) with BalancedGyro™ technology
  • Mag: BMM150
  • Barometer: 2x BMP388

Electrical data

  • Voltage Ratings:
  • Max input voltage: 6V
  • USB Power Input: 4.75~5.25V
  • Servo Rail Input: 0~36V
  • Current Ratings:
  • Telem1 output current limiter: 1.5A
  • All other port combined output current limiter: 1.5A

Dimensions

  • Dimensions
    • Flight Controller Module: 38.8 x 31.8 x 14.6mm
    • Standard Baseboard: 52.4 x 103.4 x 16.7mm
    • Mini Baseboard: 43.4 x 72.8 x 14.2 mm
  • Weight
    • Flight Controller Module: 23g
    • Standard Baseboard: 51g
    • Mini Baseboard: 26.5g

Interfaces

  • 16- PWM servo outputs
  • R/C input for Spektrum / DSM
  • Dedicated R/C input for PPM and S.Bus input
  • Dedicated analog / PWM RSSI input and S.Bus output
  • 4 general purpose serial ports
    • 3 with full flow control
    • 1 with separate 1.5A current limit (Telem1)
    • 1 with I2C and additional GPIO line for external NFC reader
  • 2 GPS ports
    • 1 full GPS plus Safety Switch Port
    • 1 basic GPS port
  • 1 I2C port
  • 1 Ethernet port
    • Transformerless Applications
    • 100Mbps
  • 1 SPI bus
    • 2 chip select lines
    • 2 data-ready lines
    • 1 SPI SYNC line
    • 1 SPI reset line
  • 2 CAN Buses for CAN peripheral
    • CAN Bus has individual silent controls or ESC RX-MUX control
  • 2 Power input ports with SMBus
    • 1 AD & IO port
    • 2 additional analog input
    • 1 PWM/Capture input
    • 2 Dedicated debug and GPIO lines

Included

Standard Set

  • Pixhawk 6X Flight Controller Module
  • Pixhawk Standard Base / Pixhawk Mini Base
  • PM02D Power Module
  • Cable Set

Standard Set + M10 GPS

  • Pixhawk 6X Flight Controller Module
  • Pixhawk Standard Base / Pixhawk Mini Base
  • PM02D Power Module
  • Cable Set
  • M10 GPS

Resources

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 64333069746

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 341 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Tania Mora
San Leandro, US
★★★★★ 5
Clear Protection and Easy Installation
Model: iPad 9th/8th/7th Gen 10.2-inch
I’m really happy with these screen protectors overall. The glass feels high quality and provides good protection without affecting the clarity or touch sensitivity of the iPad screen. The installation process was straightforward, and I didn’t have issues with bubbles as long as I followed the instructions carefully. Once applied, it looks clean and fits the screen well. Overall, this is a reliable and simple way to protect your iPad screen while keeping everything looking clear and responsive.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
A
Verified Purchase
Alexis
San Leandro, US
★★★★★ 4
Super great screen protectors, but bad prep materials.
Model: iPad A16 11th 2025 /10th 2022, Model: iPad A16 11th 2025 /10th 2022
I got an iPad A16 for my birthday and wanted some affordable but durable screen protectors. These are great, but there were a few problems I had. Pros: These fit perfectly, don't shatter or chip easily, and are a very good price. Cons: The dust absorber stickers that come with the kit aren't even close to sticky enough (I had to use just normal stickers, which was fine). The alcohol prep pad was pretty dry too (I had to use a different alcohol wipe). The screen protectors themselves are amazing. You can trust them to keep your iPad safe. Just be prepared to DIY the prep a bit. I would still reorder and recommend these!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
H
Verified Purchase
Hattie J. Kendrick
Lake Worth, US
★★★★★ 5
Excellent screen protector
Model: iPad A16 11th 2025 /10th 2022
This screen protector was easy to install and was a great value for the price paid.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
B
Verified Purchase
Brenda
Lake Worth, US
★★★★★ 5
Reliable protects
Model: iPad A16 11th 2025 /10th 2022
This screen is super helpful and are very reliable. They do not break easily the amount of times I have drop my tablet face first and I still haven’t changed it. It instills easily and the fit is perfect. It has been two years I highly recommend these screens protectors.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 28, 2026
D
Verified Purchase
DC
Birmingham, US
★★★★★ 5
Fantastic purchase
Size: X-Large, Color: Peacockblue
Bought two sets of the large and extra large backpacks in peacock blue for two traveling for an 8 day island vacation out of the country. No problems with size with American Airlines. The storage capacity was fantastic with room to spare for selected purchases to bring back. Color and fabric beautiful. Padded handle and straps comfortable. Well made with functional, easy to access compartments. Combined purchase with vacuum bags which I'm surprised helped greatly, as well as Gorpuire small foldable hand truck dolly which made transport super easy and when folded, easily fit into the front of the Xtra large bag. Unbelieveable value for the price point on all items. Wish I had taken pictures. LOVE this purchase and may not have to check bags in the future. More stars if I could!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026

recommand products