GEPRC TAKER F722 45A 32Bit AIOTAKER F722 45A AIO Remember that time you spent an hour trying to solder a VTX wire, only to bridge a pad and release the magic smoke? The engineers at TAKER do. That's why they built the TAKER F722 45A 32Bit AIO, a flight controller designed to get you flying, not fuming. With a beefy STM32F722 processor and a glorious plug and play port for your HD VTX, this AIO is the ultimate shortcut to glory and questionable life choices. Why You Want It Look,

TAKER F722 45A AIO

Remember that time you spent an hour trying to solder a VTX wire, only to bridge a pad and release the magic smoke? The engineers at TAKER do. That's why they built the TAKER F722 45A 32Bit AIO, a flight controller designed to get you flying, not fuming. With a beefy STM32F722 processor and a glorious plug-and-play port for your HD VTX, this AIO is the ultimate shortcut to glory and questionable life choices.

Why You Want It

Look, you could spend your weekend squinting at wiring diagrams and praying to the ghost of Joshua Bardwell. Or, you could snap your VTX into the dedicated port, flash your firmware, and be out dodging trees in under an hour. This board packs a fast ICM42688-P gyro and a silky-smooth 32-bit ESC that handles up to 6S power without breaking a sweat. It's the brains and the brawn for your next build, all on one tidy 25.5x25.5mm board. Yes, we want your money, but we also want you to have nice things.

The TAKER F722 45A AIO Spec Sheet

• MCU: STM32F722 (The brain your quad wishes it had)
• IMU: ICM 42688-P (The gyro that doesn't get dizzy)
• Firmware Target: GEPRC_F722_AIO
• Blackbox: 16Mb on-board flash memory (to replay your greatest hits... and crashes)
• OSD: Betaflight OSD w/ AT7456E chip
• UARTS: 5 full ports (enough to connect your GPS, receiver, and probably your smart-fridge)
• Continuous Current: 45A
• Burst Current: 55A (For about 10 seconds of pure panic)
• Input Voltage: 2~6S LiPo
• Mounting Hole: 25.5mm * 25.5mm
• Weight: 9.2g (Lighter than the existential dread of another failed build)

What’s in the Box*

• 1× TAKER F722 45A AIO FC
• 1× XT30 Power Cable
• 1× 35V 220μF Capacitor (Please, for the love of silicon, use this)
• 1× SH1.0-6Pin to GH1.25-8Pin DJI Cable
• 1× SH1.0-6Pin Cable
• 8× M2×6.5mm FC Dampening Balls

Disclaimer

*The core product is guaranteed, but the colour of the wires is subject to the whims of the universe and our packing department's mood.

Still Here?

Seriously, you're still reading? You must be the person who actually reads the terms and conditions. We respect that. You've probably already figured out this is a top-tier 25.5x25.5mm F7 flight controller with a barometer for those ambitious INAV missions you keep planning. Go on, add it to your basket. Your other components are getting lonely.