Synergy 8851-1000 1" Stage 1 Lift Kit Suspension System

Raise the suspension on your 2020-2022 Jeep Gladiator JT with the Synergy 8851-1000 1" Stage 1 Lift Kit Suspension System) from GAP. Synergy MFG Suspension Systems use a synergistic approach, meaning the combined effect of the components is greater than the sum of the individual parts. The overall performance of the system is the most important factor when Synergy was designing these components to work together. Synergy MFG Suspension Systems are complete systems for your vehicle and include all necessary components for the lift height and performance advertised.

The Jeep JT Stage 1 Suspension System is a coil spring 1-inch lift designed around 37-inch tires for Rubicon models and 35-inch tires for non-Rubicon models (See fender and bump stop spacing recommendations below). This system is designed to be the most capable performance coil spring lift in its price category with room to upgrade as needed.

• Coil Spring Suspension System To Easily Fit Larger Tires
• Improved Off Road And On Road Performance
• Includes All Components Necessary To Get You On The Trail
• Complete Bolt-On System For Easy Install
• Compatible With OEM Wheels
• No Maintenance Required For All Included Components
• Lifetime Warranty On All Hard Parts
• Fully Upgradeable To Higher Level Systems

Kit Specifications:

8851-1000 - 1" Stage 1 Lift Kit Suspension System Includes:

(1) 8863-10 1 " Front Coil Springs, Pair
(1) 8865-10 1 " Rear Coil Springs, Pair
(1) 8875-01 Front Adjustable Track Bar
(1) 8855-02 Front Sway Bar Relocation Brackets
(1) 8851-01 Front Adjustable Lower Control Arms
(1) 8881-01 Rear Adjustable Track Bar
(1) 8808-01 Rear Sway Bar Drop Brackets

Wheel and Tire Fitment:

Notes:

If using Stock Shocks, this kit MUST be used with 8817 JT Shock Relocation Brackets.

Synergy MFG coil springs lift the vehicle the advertised height over stock based on a fully loaded JT Rubicon. Other JT models will see more lift over stock. These coil springs do not lift taller than advertised. The stock rake based off the Rubicon model is kept to retain its load carrying capacity. If you prefer the vehicle to sit level when unloaded, Synergy recommends adding a small coil spacer to the front (up to 3/4-inch without affecting up travel or causing coil bind, 8017-075).

Synergy MFG is not responsible for maintaining finish of products. Environmental factors will affect rate of corrosion and wear for items advertised to be corrosion resistant. Synergy recommends using protective coatings for all items that will see extended outdoor and off road use. Synergy has had great experience with the Fluid Film product and recommend it and similar products for any items susceptible to damage from corrosion. It is great for keeping double adjuster assemblies working like new and protecting shock bodies from the elements.

EcoDiesel Note:

If installing on an EcoDiesel equipped model, Synergy Rear Sway Bar End Links Part # 8861-11 MUST be used instead of 8808-01 Rear Sway Bar Drop Brackets (See Related Item Below).