Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
For Your Every Summer RSVP, with Code: SUMMER15
Description
Edge Products Accessory System EAS (expandable)The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy chain style to the Evolution CS2, CTS2 or CTS3. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge. My Style Software Add up to 16 additional sensors
The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the Evolution CS2, CTS2 or CTS3. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge.
My Style Software
Add up to 16 additional sensors with the EAS universal senor input. Then setup, configure and customize those sensors through Edges My Style software package. Then Edge My Style software will recognize and Universal Sensor Input that has been connected to your CS2, CTS2 or CTS3 and allow the user to change PID name, gauge name description and units. The user can choose from a number of preconfigured sensors or enter in a custom look-up table to translate the input voltage to the measured parameter value and units,
EGT PROBE
The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn can can cause engine damage. With EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.
TURBO TIMER
A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine wont burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at a high speed.
EAS UNIVERSAL SENSOR INPUT
The EAS Universal Senor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS2, CTS2 or CTS3. This means you can add custom temperature, pressure, Air/fuel and even travel/position gauges to your Edge CS2, CTS2 or CTS3! Using the Edge Accessory System provides the following benefits:
Using My Style software, sensors can be easily configured and renamed.
Up to 8 Universal Sensor Input will support up to 2 sensors for the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS2, CTS or CTS3 device.
Note: Sensors from the manufactures other than Edge can also be attached to a CS2, CTS2 or CTS3 device through the EAS universal sensor input.
Eliminates the necessity of routing multiple wires to the CS2, CTS2 or CTS3 monitor.
EAS PRESSURE SENSOR
Edges EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edges Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edges Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.
Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C.
EAS TEMPERATURE SENSOR
The EAS Temperature Sensor is a 40F to 300F 1/8 NPT supplied with the connectors to plug directly into Edges Universal Senor Input System. Using Edges Temperature Sensor you can monitor Transmission Temp, Differential/Axel Oil Temp, Oil Temp, Engine Coolant Temp, Air intake temp, Pre and Post Intercooler Temp and many more. Use this in conjunction with the Universal Sensor Input and the CS2, CTS2 or CTS3 monitor to allow you to view critical temperatures with the most state-of- the- art product on the market today.
EAS AMBIENT TEMPERATURE SENSOR
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a 40F to 230 F Waterproof 0.2 diameter sensor ready to plug into Edges Universal Sensor Input system. Now you'll never wonder what outside temperature is again.* - EAS Starter Kit Cable required ** - EAS Starter Kit Cable and EAS Universal Sensor Input requiredThe EAS Starter Kit Cable is required to connect a EAS system to any CS2, CTS2 or CTS3 device. Only one EAS starter kit Cable required per CS2, CTS2 or CTS3 device.The EAS Universal (5 volt) Sensor Input is also required to add any sensor. One Universal Sensor Input can connect up to 2 different sensors.
Part Numbers & Applications:
EAS Starter Kit Cable (required For EAS) - 98602EAS
EGT Expandable w/o Starter Kit - 98611EAS
Turbo Timer (Dodge 2006-2012 Only) - 98612EAS
Turbo Timer - 98604EAS
Universal Sensor Input (5 Volt) - 98605EAS
Pressure Sensor 0-100 psig 1/8 NPT - 98607EAS
-40F to 300F 1/8" NPT Temp Sensor - 98608EAS
Ambient Temp Sensor -40F tp 230F Waterproof 0.2" diameter sensor - 98610
My Style Software
Add up to 16 additional sensors with the EAS universal senor input. Then setup, configure and customize those sensors through Edges My Style software package. Then Edge My Style software will recognize and Universal Sensor Input that has been connected to your CS2, CTS2 or CTS3 and allow the user to change PID name, gauge name description and units. The user can choose from a number of preconfigured sensors or enter in a custom look-up table to translate the input voltage to the measured parameter value and units,
EGT PROBE
The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn can can cause engine damage. With EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.
TURBO TIMER
A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine wont burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at a high speed.
EAS UNIVERSAL SENSOR INPUT
The EAS Universal Senor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS2, CTS2 or CTS3. This means you can add custom temperature, pressure, Air/fuel and even travel/position gauges to your Edge CS2, CTS2 or CTS3! Using the Edge Accessory System provides the following benefits:
Using My Style software, sensors can be easily configured and renamed.
Up to 8 Universal Sensor Input will support up to 2 sensors for the vehicle. Each Universal Sensor Input will support up to 2 sensors for a total of 16 additional sensors that can be added to your CS2, CTS or CTS3 device.
Note: Sensors from the manufactures other than Edge can also be attached to a CS2, CTS2 or CTS3 device through the EAS universal sensor input.
Eliminates the necessity of routing multiple wires to the CS2, CTS2 or CTS3 monitor.
EAS PRESSURE SENSOR
Edges EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edges Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edges Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.
Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C.
EAS TEMPERATURE SENSOR
The EAS Temperature Sensor is a 40F to 300F 1/8 NPT supplied with the connectors to plug directly into Edges Universal Senor Input System. Using Edges Temperature Sensor you can monitor Transmission Temp, Differential/Axel Oil Temp, Oil Temp, Engine Coolant Temp, Air intake temp, Pre and Post Intercooler Temp and many more. Use this in conjunction with the Universal Sensor Input and the CS2, CTS2 or CTS3 monitor to allow you to view critical temperatures with the most state-of- the- art product on the market today.
EAS AMBIENT TEMPERATURE SENSOR
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a 40F to 230 F Waterproof 0.2 diameter sensor ready to plug into Edges Universal Sensor Input system. Now you'll never wonder what outside temperature is again.* - EAS Starter Kit Cable required ** - EAS Starter Kit Cable and EAS Universal Sensor Input requiredThe EAS Starter Kit Cable is required to connect a EAS system to any CS2, CTS2 or CTS3 device. Only one EAS starter kit Cable required per CS2, CTS2 or CTS3 device.The EAS Universal (5 volt) Sensor Input is also required to add any sensor. One Universal Sensor Input can connect up to 2 different sensors.
Part Numbers & Applications:
EAS Starter Kit Cable (required For EAS) - 98602EAS
EGT Expandable w/o Starter Kit - 98611EAS
Turbo Timer (Dodge 2006-2012 Only) - 98612EAS
Turbo Timer - 98604EAS
Universal Sensor Input (5 Volt) - 98605EAS
Pressure Sensor 0-100 psig 1/8 NPT - 98607EAS
-40F to 300F 1/8" NPT Temp Sensor - 98608EAS
Ambient Temp Sensor -40F tp 230F Waterproof 0.2" diameter sensor - 98610
WARRANTY INFO:
1 Year
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 291 reviews
Sort
Product Reviews
★★★★★ 4
Slow, sorry but good
Format: Kindle
This was a slow moving book. Lots of character pov chapters, lots of superfluous descriptions and endless courtly appearances stalled this book to start. Once you get into the heart of the story, it takes off. Before you know it the book is done. My favorite character is Reyna. She is so strong. She is true to herself. She gets into a lot of trouble with her headstrong ways but it's entertaining. I have high hopes for Lorcan. He is honorable to a fault. Thane had turned out to be better than I thought but i still don't like him. Eislin is useless. Great plot twists at the end. I'm looking forward too book 2.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 6, 2020
★★★★★ 5
Very detailed! Beautiful world building! Strong Heroine!
Format: Kindle
Starts off a little slow and confusing with different POV’s, but starts to all come together towards the middle to make an elaborate plot line and makes it all worth it. Beautiful world building and attention to detail as well as great writing. The cliffhanger was gut wrenching! Can’t wait for the next book!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 4, 2020
★★★★★ 4
Interesting
Format: Kindle
This was a very captivating book once you got into it thoroughly. But the third person perspective was a bit hard to get used to. But as you got into it and followed the different characters, it was interesting and filled with intrigue, conflict and forbidden love.
I can’t wait to read the next one and to complete the series.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 12, 2022
★★★★★ 5
OUTSTANDING
Format: Kindle
This was very, very good. The world is vast and characters are complex. There is a good plot with a whole lot going on. This is well written. Good twists and turns and some heart breaking moments. You will love these characters, they have heart and loyalty. I am hoping that there will be several more books. We've yet to see anything from the Sea Court but only a mention of them here and there. The Wood Court was given a quick couple of scenes, and only as far as some warriors, we've yet to enter their court and the Shadow Court, I'm not sure if they will be a force for good or bad, but they definitely will play a much bigger role moving forward. This is primarily the Ice and Air Courts. Told in multiple views, which I loved, it gives you a chance to see things from different eyes. There's alot of political maneuvering and deception. I loved it and will pick up the next book as it becomes available. If you like The Fae and the courts, you should love this. I think the author has mucn in store for us.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2020
★★★★★ 4
Definitely worth the read!
Format: Kindle
After taking a deep breath and taking in that wicked twist of an ending, I have finally composed myself. My first thought when I started this book was that I love Reyna's character. I was intrigued by her connection with her familiar and the Ruin that is plaguing her land. It came as no surprise that she took her sister's place in an attempt to protect her. When they reach the Air Court everything slows down. This is where it was iffy for me. First of all, I like multiple POV's in books however 7 is a bit much. It starts to interrupt the story line. I felt like I was finally making progress connecting with one character, then it was switched to another person. I felt they all had necessary or pertinent information but not necessarily were they all POV worthy. The only other thing that annoyed me was that Reyna constantly was " trapped." She would rush off without thinking, only to need rescuing. She is brilliant in a fight, but she really doesn't think through anything. Lorcan is amazing. I know he might be on the "bad" list, but his background is so interesting. Eislyn(Reyna's sister) is really so sweet, but calculating. I enjoyed her and Thane's dialogue. The author did an amazing job with the imagery in this book. Everything was so detailed it was easy to fall into the scene. I love unexpected twists and while part of the ending I expected, I wasn't expecting how it took place. All in all, I found it very entertaining and I am very invested in continuing this series.
Favorite quotes:
"The truth may be twisted but never false."
"Who was she if she was not the enemy of the Air Court? What was her purpose of she no longer has that?"
"In a war-torn land, love was always a lie."
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 4, 2020