HPE 24-port 1GbE SFP MACsec v3 zl2 Module

Designed to maximize density, security, and performance, the HPE 24-port 1GbE SFP MACsec v3 zl2 Module is the ideal expansion solution for the 5400R zl2 Switch Series. This high-capacity module brings secure, fiber-based connectivity to enterprise networks and data centers, enabling administrators to scale their networks without sacrificing encryption or performance. With 24 independent SFP ports supporting 1000BASE-X, Cisco-compatible fiber links, and MACsec v3 encryption, this module delivers robust data protection and versatile deployment options for demanding environments.

• High-density fiber expansion: Add 24 independent SFP ports to a single 5400R zl2 switch, dramatically increasing your port footprint and enabling flexible fiber deployments across campuses, data centers, and edge locations. Each port supports 1000BASE-X for reliable gigabit performance over fiber cabling.
• MACsec v3 encryption for secure data-in-transit: Protect sensitive information as it traverses the network. MACsec v3 on the zl2 module provides hardware-based encryption to help meet regulatory and compliance requirements while maintaining low latency and high throughput.
• 1 Gbps per port with scalable throughput: Each SFP port delivers up to 1 Gbps of usable bandwidth, and total capacity scales with the number of active ports. This arrangement is ideal for building secure, scalable fiber backbones or server‑to‑storage links in a single chassis.
• Plug-and-play in the 5400R zl2 ecosystem: The module is designed for seamless installation within the 5400R zl2 switch family. It’s a hot-swappable expansion option, minimizing downtime during maintenance or capacity upgrades and preserving network uptime.
• Hardware compatibility and management integration: Built to work with HPE’s switch management tools, policy features, and standard networking protocols. The module supports the security, VLAN, QoS, and monitoring capabilities common to the 5400R zl2 platform, enabling consistent policy enforcement across the network.

Technical Details of [product]

• Product Type: Expansion Module for HPE 5400R zl2 Switch Series
• Ports: 24 x 1000BASE-X SFP ports
• MACsec: MACsec v3 encryption on supported ports
• Compatible Series: HPE 5400R zl2 Switch Series
• Data Rate per Port: Up to 1 Gbps
• Form Factor: Expansion Module for zl2 chassis
• Installation: Hot-swappable in the appropriate expansion slot

how to install [product]

• Preparation: Verify that your 5400R zl2 switch is powered off or in a maintenance window if required by your change management policy. Confirm you have the correct expansion slot available for the module.
• Open and insert: Remove any blanking filler if present in the expansion slot. Align the module’s connectors with the chassis backplane and gently push until the module seats fully and evenly.
• Secure and power on: If your chassis uses latching mechanisms or screws, secure the module and restore power to the switch. Allow the system to initialize and recognize the new hardware.
• Verify recognition: Access the switch management interface or console to verify that the 24-port SFP module is detected. Confirm that all ports are listed as operational and that there are no errors on the line cards.
• Configure ports and security: Enable and configure the SFP ports as needed (VLANs, QoS, link aggregation, and any MACsec policies on applicable ports). Save the configuration and validate connectivity between endpoints to ensure secure, stable operation.

Frequently asked questions

• Q: What is the primary use case for the HPE 24-port 1GbE SFP MACsec v3 zl2 Module?
  A: It expands port density on the HPE 5400R zl2 switches with 24 1000BASE-X SFP ports, enabling secure, fiber-based connections across campuses, data centers, and enterprise networks while maintaining enterprise-grade encryption via MACsec v3.
• Q: Does this module support MACsec encryption on all ports?
  A: The module provides MACsec v3 encryption capabilities on supported ports. Activation and policy enforcement are managed through the switch’s security features and configuration.
• Q: Can I mix this expansion module with other zl2 expansion options?
  A: Yes. The 5400R zl2 ecosystem supports a variety of expansion modules. This 24-port SFP module is designed to integrate with compatible zl2 chassis to meet high-density fiber connectivity needs.
• Q: What cables and optics are required for 1000BASE-X SFP ports?
  A: Each port requires a compatible 1000BASE-X SFP transceiver and corresponding fiber optic or copper media (as supported by the SFP transceiver), in accordance with your network design and distance requirements.
• Q: Is this module hot-swappable?
  A: Yes. The module is designed to be hot-swappable in the appropriate expansion slot, minimizing downtime during maintenance or capacity upgrades.
• Q: What management features are supported with this module?
  A: The module integrates with standard HPE management tools and policies for the 5400R zl2 series, including VLAN tagging, QoS, monitoring, and MACsec policy enforcement across enabled ports.
• Q: How does MACsec v3 improve security?
  A: MACsec v3 provides hardware-based encryption for Ethernet frames at the data link layer, protecting against eavesdropping and tampering on wired links and helping meet compliance requirements for sensitive data in transit.
• Q: Are there any prerequisites to deploy this module?
  A: Ensure your switch model and software version support the 5400R zl2 expansion module, that you have an available expansion slot, and that you configure MACsec and port policies in line with your security and networking goals.