100-550mm 0-190Ohm Fuel Float Sensor + Fuel Level Gauge 7 Color LED Fuel Tank Level Gauge With Alarm Light For Marine Car RV

Fuel Gauge Specification:

- Operating Voltage:9~32VDC,

- Operating current:≤70mA(24V);

- Operating temperature:-30~+75℃

- Storage temperature:-40~+85℃.

- Signal: 0-190ohm

- Backlight: 8 Color LED

- Range: Empty to 1/2 to Full

Operation:

1, Press the Mode button (less than 1 second) to change the

backlight color: Backlight changed in sequence: red (default) →

green → blue → white → yellow green → orange →

Purple

2,Users could select the input resistance as down

below operations if you have Fuel /Water/Sewage

level gauge.Hold the Mode button for 3 seconds to

enter the setting mode, back light flickering for a while.

The needle point at the ''E'' position, and you could select

the corresponding parameter via pressing the button

as down below form.

Gauge Connection:

1,Black-- Ground(-)

2,Red --+9~32VDC

3,Blue--Signal input

4,Yellow--Blacklight(+)

5,White-Adjust

Package:

1 PCS Gauge+Cable+Manual

Fuel Level Sensor Specification:

- Protection ank: IP67

- Resolution range: 21 mm

- Assembly: SAE standard 5 holes

- Rated current for alarm switch: 500mA

- Operating temperatures: - 40 to 85 Celsius

- Fit for Fuel Level Gauge and Water Level Gauge

- Sensor Length :100mm-500mm

- Mounting: 5 pieces of M5 screws and 2 mm thick gasket

- Output signal: 0~190 ohm (Standard European),

Can be customized:

- Sensor Length:

100mm, 150mm, 200mm, 250mm, 300 mm ,350 mm ,400mm, 450 mm,500mm, 550mm, 600mm, 650mm, and so on

- The length and output signal of the sensor can be customized, if you need other sizes or output signal, please contact us at any time, we can customize any size for you~~

Attention:

- Empty oil level : 0 ohm

- Full oil level : 190 ohm

- When the oil / water level is empty , there will be a space of 3-15mm between the sensor float and the bottom of the sensor. This is a safe distance, and the sensor can work normally,Thank you~

- When the oil / water level is full, there will be a space of 3-15mm between the sensor float and the top of the sensor. This is a safe distance, and the sensor can work normally, Thank you~

Package: