Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 9 - Jul 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Action Clutch 2022 Honda Civic SI 1.5L (L15B7) Turbo Ironman Sprung (Street) Clutch w/Chromoly FWThe Action Clutch Ironman Sprung (Street) kit is engineered specifically for dedicated high powered race vehicles, delivering durability and reliable performance. It features our American Sintered Iron friction material with our Dual clamp load heavy duty pressure plate that ensures maximum torque holding capacity. The clutch engagement is aggressive with an on off feel, without introducing clutch chatter. Some light engagement noise and gear rattle
The Action Clutch Ironman Sprung (Street) kit is engineered specifically for dedicated high powered race vehicles, delivering durability and reliable performance. It features our American Sintered Iron friction material with our Dual clamp load heavy-duty pressure plate that ensures maximum torque holding capacity. The clutch engagement is aggressive with an on/off feel, without introducing clutch chatter. Some light engagement noise and gear rattle may be experienced during operation due to the nature of the product. No compromises are made in this kit, ensuring optimal performance even under extreme conditions. This kit is not intended for daily use and should only be used in race applications. At Action Clutch, safety is our top priority. We understand how catastrophic engine or transmission damage can be caused by springs popping out which is why we use our patented, fully enclosed spring retainers to keep your investment protected at all times. Every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time. NOTE: Purchasing the wrong type of clutch kit for your specific engine power output can result in premature clutch failure, damage to the transmission and void warranty eligibility. If you're unsure what kit is right for you, contact Action Clutch direct. 250% INCREASED HOLDING CAPACITY OVER FACTORY KIT SPECIFICALLY ENGINEERED FOR TRACK USE APPLICATIONS ONLYThis Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022 | Honda | Civic | Si |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 1021 reviews
Sort
Product Reviews
★★★★★ 5
1999 BMW 528i Fit and works like Original BMW-Pleasantly Surprised
1999 BMW 528i M52TU Engine. Pleasantly surprised and impressed. Everything fit as it should. Yes, one connector pipe took a bit more pressure to get it to "click" and lock, but it did click and lock..and better tight to insure no vacuum leak. Definitely works well and stopped the vacuum leak that old system had. Would recommend especially since price point might lead one to think that quality is not that good, but I'm glad I didn't spend any more on something else. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 3, 2025
★★★★★ 5
Test fit to make sure it connects
When I revived it I thought it had looked a little too small until I compared it, I test fitted it and at first I thought it was a tad bit bigger but realized the more I pushed it in the more it went very tight fit and my car is running healthy. Installation is a pain but go to YouTube and search the “” the 50’s kid”” Who has two methods to getting them on, I went the intake removal route to replace additional parts.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2020
★★★★★ 5
Cheap Replacement
These are an easy replacement for anyone who owns a BMW m52/m54 engine that has PCV issues. My car was burning about 1 quart every 1,000 miles. The parts are direct fit and install fairly easy. If there is resistance, lube the hole or o-ring up with some grease and it will slide in easier. Took me about 2 hours start to finish. My mechanic recommended that I remove the intake manifold to do the job. I don’t see how you could do it without removing the intake manifold.
These parts probably won’t last as long as true BMW parts but on a 20 year old car I don’t see the benefit in using genuine BMW parts. Cheap stuff will suffice; worst case it doesn’t last quite as long.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2021
★★★★★ 4
NOT TOO HARD TO INSTALL...
This CCV kit seems adequate.
People say that because the hoses supplied with these kits are more brittle than the genuine BMW parts, these are tough to install... But they're really not.
The ends on these hoses SWIVEL and you can sort of eyeball which way you need the fitting to be pointing BEFORE you put them on your manifold... They swivel, but they're tight and it takes a little force to turn them.
ALSO, a little dab of silicone gel or a spray of silicone out of the can, into the fittings on these makes a world of difference when clicking them on...
For the price, I highly recommend the kit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 14, 2025
★★★★★ 5
Great value
I recently had to replace the starter on my 2001 325i E46 with about 150k miles. While I had the intake off, I figured it would be a good time to replace the CCV because I was unsure if it had ever been done. My old CCV literally fell apart as I removed it, so I'm glad I replaced it.
The new parts were a little tough to put together, but overall came together well enough. A lot can be forgiven for the price. I would recommend assembling the system before installing in your vehicle to get a good sense of how it all goes together and to hopefully loosen up the fittings just a tad before installation. 50skid on youtube has a great DIY for doing this job.
I only finished this job yesterday, but my car has been running great. I can't yet confirm, but this may have solved my running lean problem.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 27, 2023
recommand products
Custom Pink White Fuzzy Rose Art 3D Pattern Design Bomber Full-Snap Varsity Letterman Jacket
38.99
Custom Kelly Green White-Orange Bomber Full-Snap Varsity Letterman Two Tone Jacket
38.99
Custom Neon Green Pink-Black Bomber Full-Snap Varsity Letterman Fade Fashion Jacket
38.99
Custom Old Gold Kelly Green-Black Bomber Full-Snap Varsity Letterman Fade Fashion Jacket
38.99
Custom Black Gold-Orange Bomber Full-Snap Varsity Letterman Gradient Fashion Jacket
38.99