SKU: 45332241895

Kennzeichenhalter Highsider Akron-RS Pro für Honda CB 1000 Hornet /SP CB 650 R CBR 650 R

$111.56 $123.95
Save 10%
No.2 Bestseller on ekmsliberia.info >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 12 - Jul 17

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Kennzeichenhalter Highsider Akron-RS Pro für Honda CB 1000 Hornet /SP CB 650 R CBR 650 RHighsider Kennzeichenhalter Akron RS Pro mit Beleuchtungsset Hochwertiges Kennzeichenhalter Set mit einer modernen Kennzeichenleuchte und einem Rckstrahler mit verstellbarem Halter. Der Nummernschildhalter ist stufenlos in der Neigung, sowie in der Breite und Hhe verstellbar. Die enthaltenen Blinker Halterungen sind fr nahezu alle Universalblinker mit einem Gewinde bis M8 geeignet. Die modellbezogene Aufnahme ist direkt auf das jeweilige Fahrzeug

Highsider Kennzeichenhalter Akron-RS Pro mit Beleuchtungsset

Hochwertiges Kennzeichenhalter-Set mit einer modernen Kennzeichenleuchte und einem Rückstrahler mit verstellbarem Halter. Der Nummernschildhalter ist stufenlos in der Neigung, sowie in der Breite und Höhe verstellbar.
Die enthaltenen Blinker-Halterungen sind für nahezu alle Universalblinker mit einem Gewinde bis M8 geeignet.
Die modellbezogene Aufnahme ist direkt auf das jeweilige Fahrzeug angepasst und somit müssen für die Montage keinerlei Verkleidungsteile verändert werden.
Um eine Beschädigung an Kabeln zu vermeiden, sind alle scharfkantigen Durchführungen mit einer Membranhülle aus Gummi geschützt.

Produktdetails

  • Modell bezogene und passgenaue Aufnahme
  • Schwarz pulverbeschichtete Platte aus 2 mm Stahlblech
  • Stufenlos verstellbarer Neigungswinkel
  • Mit Schraube zum Sichern des Neigungswinkels
  • Einfache Fixierung ohne Bohren
  • Passend für europäische Kennzeichen
  • Einfache Montage des Kennzeichens durch Langlöcher
  • Stufenlos verstellbare Blinker-Halter
  • Geschlitzte Blinker-Halter mit 8 mm Bohrung
  • Stufenlos verstellbarer Rückstrahler E-geprüft
  • Stufenlos verstellbare Kennzeichenbeleuchtung E-geprüft
  • Keine Eintragung beim TÜV oder ABE erforderlich

Hinweise

Mit den enthaltenen Blinker-Aufnahmen können Universalblinker bis zu einem M8 Gewinde verwendet werden. Die Originalblinker passen nicht auf diese Aufnahmen.
Blinker-Aufnahmen für die Originalblinker sind optional erhältlich.
Bei der Kennzeichenbeleuchtung sind keine fahrzeugbezogenen Stecker verbaut. Hier können Anpassungen der Kabel oder ein passendes Adapterkabel benötigt werden.

Lieferumfang

1x Fahrzeugbezogene Aufnahme mit Montagematerial
1x Kennzeichen Halteplatte Akron-RS
2x Verstellbare Blinker-Halterungen
1x E-geprüfte Kennzeichenbeleuchtung
1x E-geprüfter Reflektor mit verstellbarem Halter

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 45332241895

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 1263 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Tharin
Boise, US
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ. Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that. Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
H
Verified Purchase
Harvey
San Leandro, US
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
L
Verified Purchase
Lyrah
Massapequa, US
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
A
Verified Purchase
Alexis
San Leandro, US
★★★★★ 5
Supports DP Alt + Power Delivery from one source
This is one of the very, very few USB-C hubs out there that successfully pushes DisplayPort Alt and 100w PD functionality from one source cable to one device. My monitor has a USB-C DP alt port that also pushes 95w PD and this hub successfully pushes both of those to my laptop, phone, and android handheld console. The marketing material says something about USB PD cannot work with DP alt, but it seems to be working fine for me so who knows. With this little hub in-between the link from the monitor to the device, I can now add a USB ethernet adapter and game controller, and I only ever have to plug one USB-C cable into my device (and I am using a USB4 extension cable with no issues as well) and it all works perfectly!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2026
M
Verified Purchase
Mark N.
Massapequa, US
★★★★★ 5
Supports Reverse Charging a Laptop on Monitors with USB-C PD!
This adapter is unique in that it supports reverse charging + video on the same port. I use this with an LG monitor (60W PD) and an M1 Pro Mac. At first, I had connectivity issues: hub was disconnecting and reconnecting every few seconds. I followed advice to update the firmware on the hub, but that didn't solve the issue. Turns out, my monitor also needed a firmware update. Once I updated the monitor firmware, it stabilized and has been working great ever since.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 4, 2025

recommand products

Arisha Design Drachen LED Deckenleuchte Grün/Rosa Kinder/Schlafzimmer Metall&Acryl Dimmbar 48CM Höhe
149.99
Arisha Vintage LED Pendelleuchte Multicolour Metall Glas Schlafzimmer
425.00
Arisha Tiffany Buntglas Kuppel Pendelleuchte, Gelb
110.00
watch ultimate milanese armband lila
20.99
Arisha Vintage Art LED Pendelleuchte Farbig Glas Wohnzimmer
160.00